Page 6 / 12 Scroll up to view Page 1 - 5
6
Using The Setup Wizard
Using The Setup Wizard
Using The Setup Wizard
Using The Setup Wizard
Using The Setup Wizard
Open your Web browser
and type
“http://
192.168.0.50:2000”
into
the URL address box. Then
press the
Enter
or
Return
key.
The logon pop-up
screen will appear.
Type
“admin”
for the
username and by
default the password
is
“root”
Click
OK
Once you have
logged in, the
Home
screen will appear.
Click
Run Wizard
****
Page 7 / 12
7
Click
Next
Step 1
-
Set up your
new password
. You
have the option to
establish a password.
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
You will see the
following screens.
Click
Next
Page 8 / 12
8
Click
Next
Click
Next
Step 2
-
Internet
Connection Type (WAN)
Select your Internet
Connection type.
Some
ISP’s provide
you with an
automatic IP address, if
this is the case you
would select Dynamic.
If
you are assigned an IP
address from your ISP,
select Static. In this QIG
we will be using Static.
Step 3
-
Set Static IP
Address
The DWL-
1700AP is capable of two
levels of wireless
encryption - 64-bit and
128-bit.
By default
encryption is disabled.
You can change the
encryption settings for a
more secure wireless
network.
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Page 9 / 12
9
Step 4
-
Set Wireless
LAN Connection
Enter your desired
ESS-ID and the
channel that you wish
to use here.
This is
the ESS-ID that will be
broadcasted to
wireless users.
Click
Next
Step 5
-
Enable/
Disable Wireless
Encryption
If you wish to use
encryption, you may
enable here.
If you
enable encryption,
please be sure to
select the encryption
level and also the
encryption key.
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Using The Setup Wizard (continued)
Click
Next
Page 10 / 12
10
When you have completed
the steps in this
Quick
Installation Guide,
your
connected network should
look similar to this:
Your Setup is Complete!
Your Setup is Complete!
Your Setup is Complete!
Your Setup is Complete!
Your Setup is Complete!
Click
Restart

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top