Page 56 / 64 Scroll up to view Page 51 - 55
Tools > Time
The system time is the time
used by the DVG-G1402S
for scheduling services.
You can manually set the
time, connect to a NTP
(network time protocol)
server or synchronize the
time on the router with your
PC. If an NTP server is set,
you will only need to set the
time zone (in the set up
wizard).
55
Page 57 / 64
Status > Device Info
This page displays the
current information for the
DVG-G1402S. It will
display the LAN, WAN,
Disk Information statistics.
This window will show the
DVG-G1402S’s working
status:
WAN
IP Address
: WAN/Public IP Address
Subnet Mask
: WAN/Public Subnet Mask
Default Gateway
: WAN/Public Gateway IP Address
LAN
LAN MAC Address
: MAC address of the DVG-G1402S
IP Address
: LAN/Private IP Address of the DVG-G1402S
Subnet Mask
: LAN/Private Subnet Mask of the DVG-G1402S
56
Page 58 / 64
Status > Stats > Network
The Broadband Router keeps a running log of events and activities occurring on the
Router. If the device is rebooted, the logs are automatically cleared. You may save the log
files under Log Settings. The screen above displays the Network Statistics. Here you can
view the amount of packets that pass through the DVG-G1402S on both the WAN and
the LAN ports. The traffic counter will reset if the device is rebooted or can be reset by
clicking the
Reset
button. To refresh current statistics, click the
Refresh
button.
57
Page 59 / 64
Status > Stats > Phone Call
58
Page 60 / 64
The Broadband Router keeps a running log of events and activities occurring on the
Router. If the device is rebooted, the logs are automatically cleared. You may save the log
files under Log Settings. The screen above displays the Phone Statistics. Here you can
view the amount of packets that pass through the DVG-G1402S on both Phone 1 and
Phone 2 ports. The traffic counter will reset if the device is rebooted or can be reset by
clicking the
Reset
button. To refresh current statistics, click the
Refresh
button.
Status > Diagnostics
The Diagnostics window allows users to test the functionality of the router by executing
a ping test. Enter the IP address of the Ping Target and then click
Test
.
59

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top