1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSR-500N
    5. /
  5. 41
Page 201 / 270 Scroll up to view Page 196 - 200
Appendix B.
Factory Default Settings
Fe ature
De s cription
De fault Setting
Device login
User login URL
User name (case sensitive)
admin
Login password (case sensitive)
admin
Internet
Connection
WAN MAC address
Use default address
WAN MTU size
1500
Port speed
Autosense
Local area network
(LAN)
IP address
192.168.10.1
IPv4 subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
Disabled
DHCP server
Enabled
DHCP starting IP address
192.168.10.2
DHCP ending IP address
192.168.10.100
Time zone
GMT
Time zone adjusted for Daylight Saving Time
Disabled
SNMP
Disabled
Remote management
Disabled
Firewall
Inbound communications from the Internet
Disabled (except traffic on port
80, the HTTP port)
Outbound communications to the Internet
Enabled (all)
Source MAC filtering
Disabled
Stealth mode
Enabled
Page 202 / 270
Unified Services Router
User Manual
200
Appendix C.
Standard Services
Available for Port Forwarding
& Firewall Configuration
ANY
AIM
BGP
BOOTP_CLIENT
BOOTP_SERVER
CU-SEEME:UDP
CU-SEEME:TCP
DNS:UDP
DNS:TCP
FINGER
FTP
HTTP
HTTPS
ICMP-TYPE-3
ICMP-TYPE-4
ICMP-TYPE-5
ICMP-TYPE-6
ICMP-TYPE-7
ICMP-TYPE-8
ICMP-TYPE-9
ICMP-TYPE-10
ICMP-TYPE-11
ICMP-TYPE-13
ICQ
IMAP2
IMAP3
IRC
NEWS
NFS
NNTP
PING
POP3
PPTP
RCMD
REAL-AUDIO
REXEC
RLOGIN
RTELNET
RTSP:TCP
RTSP:UDP
SFTP
SMTP
SNMP:TCP
SNMP:UDP
SNMP-TRAPS:TCP
SNMP-TRAPS:UDP
SQL-NET
SSH:TCP
SSH:UDP
STRMWORKS
TACACS
TELNET
TFTP
VDOLIVE
Page 203 / 270
Unified Services Router
User Manual
201
Appendix D.
Log Output Reference
Facility: System (Networking)
Log Message
Severity
Log Message
Severity
DBUpdate event: Table: %s opCode:%d
rowId:%d
DEBUG
BridgeConfig: too few arguments to
command %s
ERROR
networkIntable.txt not found
DEBUG
BridgeConfig: too few arguments to
command %s
ERROR
sqlite3QueryResGet failed
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
Interface is already deleted in bridge
DEBUG
ddnsDisable failed
ERROR
removing %s from bridge %s... %s
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
adding %s to bridge %s... %s
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
stopping bridge...
DEBUG
ddnsDisable failed
ERROR
stopping bridge...
DEBUG
failed to call ddns enable
ERROR
stopping bridge...
DEBUG
ddnsDisable failed
ERROR
%s:DBUpdate event: Table: %s
opCode:%d rowId:%d
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
Wan is not up
DEBUG
Error in executing DB update handler
ERROR
%s:DBUpdate event: Table: %s
opCode:%d rowId:%d
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
doDNS:failed
DEBUG
Illegal invocation of ddnsView (%s)
ERROR
doDNS:failed
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
doDNS:Result = FAILED
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
doDNS:Result SUCCESS
DEBUG
ddns: SQL error: %s
ERROR
Write Old Entry: %s %s %s: to %s
DEBUG
Illegal operation interface got deleted
ERROR
Write New Entry: %s %s #%s : to %s
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
Write Old Entry: %s %s %s: to %s
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
Write New Entry: %s %s #%s : to %s
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
ifStaticMgmtDBUpdateHandler: returning
with "
DEBUG
ddnsDisable failed
ERROR
nimfLinkStatusGet: buffer: \
DEBUG
ddns: SQL error: %s
ERROR
nimfLinkStatusGetErr: returning with
status: %d
DEBUG
Failed to call ddns enable
ERROR
nimfAdvOptSetWrap: current Mac
Option: %d
DEBUG
ddns: SQL error: %s
ERROR
nimfAdvOptSetWrap: current Port Speed
Option: %d
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
nimfAdvOptSetWrap: current Mtu Option:
%d
DEBUG
Failed to call ddns enable
ERROR
nimfAdvOptSetWrap: looks like we are
reconnecting. "
DEBUG
ddns: SQL error: %s
ERROR
nimfAdvOptSetWrap: Mtu Size: %d
DEBUG
ddnsDisable failed
ERROR
nimfAdvOptSetWrap: NIMF table is %s
DEBUG
ddns: SQL error: %s
ERROR
nimfAdvOptSetWrap:WAN_MODE
TRIGGER
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
nimfAdvOptSetWrap: MTU: %d
DEBUG
Failed to call ddns enable
ERROR
nimfAdvOptSetWrap: MacAddress: %s
DEBUG
ddns: SQL error: %s
ERROR
nimfAdvOptSetWrap: old Mtu Flag: %d
DEBUG
ddnsDisable failed
ERROR
Page 204 / 270
Unified Services Router
User Manual
202
nimfAdvOptSetWrap: user has changed
MTU option
DEBUG
ddns: SQL error: %s
ERROR
nimfAdvOptSetWrap: MTU: %d
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
nimfAdvOptSetWrap: old MTU size: %d
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
nimfAdvOptSetWrap: old Port Speed
Option: %d
DEBUG
ddnsDisable failed
ERROR
nimfAdvOptSetWrap: old Mac Address
Option: %d
DEBUG
ddns: SQL error: %s
ERROR
nimfAdvOptSetWrap: MacAddress: %s
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
Setting LED [%d]:[%d] For %s
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
l2tpEnable: command string: %s
DEBUG
ddnsDisable failed
ERROR
nimfAdvOptSetWrap: handling reboot
scenario
DEBUG
failed to call ddns enable
ERROR
nimfAdvOptSetWrap: INDICATOR = %d
DEBUG
ddns: SQL error: %s
ERROR
nimfAdvOptSetWrap: UpdateFlag: %d
DEBUG
ddnsDisable failed
ERROR
nimfAdvOptSetWrap: returning with
status: %s
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
nimfGetUpdateMacFlag: MacTable Flag
is: %d
DEBUG
Error in executing DB update handler
ERROR
nimfMacGet: Mac Option changed
DEBUG
Failed to open the resolv.conf file.
Exiting./n
ERROR
nimfMacGet: Update Flag: %d
DEBUG
Could not write to the resolv.conf file.
Exiting.
ERROR
nimfMacGet: MacAddress: %s
DEBUG
Error opening the lanUptime File
ERROR
nimfMacGet: MacAddress: %s
DEBUG
Error Opening the lanUptime File.
ERROR
nimfMacGet: MacAddress: %s
DEBUG
failed to open %s
ERROR
nimfMacGet: MacAddress: %s
DEBUG
failed to open %s
ERROR
nimfMacGet: MacAddress: %s
DEBUG
failed to query networkInterface table
ERROR
nimfMacGet:Mac option Not changed \
DEBUG
failed to query networkInterface table
ERROR
nimfMacGet: MacAddress: %s
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
nimfMacGet: MacAddress: %s
DEBUG
failed to enable IPv6 forwarding
ERROR
nimfMacGet: MacAddress: %s
DEBUG
failed to set capabilities on the "
ERROR
nimfMacGet: returning with status: %s
DEBUG
failed to enable IPv6 forwarding
ERROR
Now in enableing LanBridge function
DEBUG
failed to set capabilities on the "
ERROR
sucessfully executed the command %s
DEBUG
failed to disable IPv6 forwarding
ERROR
Now in disableing LanBridge function
DEBUG
failed to set capabilities on the "
ERROR
sucessfully executed the command %s
DEBUG
failed to open %s
ERROR
configPortTblHandler:Now we are in
Sqlite Update "
DEBUG
Could not create ISATAP Tunnel
ERROR
The Old Configuration of ConfiPort
was:%s
DEBUG
Could not destroy ISATAP Tunnel
ERROR
The New Configuration of ConfiPort
was:%s
DEBUG
Could not configure ISATAP Tunnel
ERROR
The user has deselected the
configurable port
DEBUG
Could not de-configure ISATAP
Tunnel
ERROR
failed query %s
DEBUG
nimfStatusUpdate: updating
NimfStatus failed
ERROR
failed query %s
DEBUG
nimfStatusUpdate: updating
NimfStatus failed
ERROR
failed query %s
DEBUG
nimfLinkStatusGet: determinig link's
status failed
ERROR
%s:DBUpdate event: Table: %s
opCode:%d rowId:%d
DEBUG
nimfLinkStatusGet: opening status file
failed
ERROR
Page 205 / 270
Unified Services Router
User Manual
203
%s:DBUpdate event: Table: %s
opCode:%d rowId:%d
DEBUG
Failed to commit
ERROR
%s:%d SIP ENABLE: %s
DEBUG
ifStatusDBUpdate: Failed to begin "
ERROR
sipTblHandler:failed to update ifStatic
DEBUG
%s: SQL error: %s
ERROR
sipTblHandler:failed to update Configport
DEBUG
%s: Failed to commit "
ERROR
%s:%d SIP DISABLE: %s
DEBUG
nimfNetIfaceTblHandler: unable to get
LedPinId
ERROR
%s:%d SIP SET CONF: %s
DEBUG
nimfNetIfaceTblHandler: unable to get
LedPinId
ERROR
Failed to open %s: %s
DEBUG
nimfNetIfaceTblHandler: unable to get
LedPinId
ERROR
Failed to start sipalg
DEBUG
%s: unable to kill dhclient
ERROR
Failed to stop sipalg
DEBUG
nimfAdvOptSetWrap: unable to get
current Mac Option
ERROR
Failed to get config info
DEBUG
nimfAdvOptSetWrap: unable to get
current Port "
ERROR
Network Mask: 0x%x
DEBUG
nimfAdvOptSetWrap: unable to get
current MTU Option
ERROR
RTP DSCP Value: 0x%x
DEBUG
nimfAdvOptSetWrap: error getting
Mac Address from "
ERROR
Need more arguments
DEBUG
nimfAdvOptSetWrap: unable to get
the MTU
ERROR
Invalid lanaddr
DEBUG
nimfAdvOptSetWrap: error setting
interface advanced "
ERROR
Invalid lanmask
DEBUG
nimfAdvOptSetWrap: error getting
MTU size
ERROR
Invalid option
DEBUG
nimfAdvOptSetWrap: unable to get
Mac Address
ERROR
Failed to set config info
DEBUG
nimfAdvOptSetWrap: error setting
interface advanced "
ERROR
Unknown option
DEBUG
nimfAdvOptSetWrap: failed to get old
connectiontype
ERROR
sshdTblHandler
DEBUG
nimfAdvOptSetWrap: old connection
type is: %s
ERROR
pPort: %s
DEBUG
nimfAdvOptSetWrap: failed to get old
MTU Option
ERROR
pProtocol: %s
DEBUG
nimfAdvOptSetWrap: error getting
MTU size
ERROR
pListerAddr: %s
DEBUG
nimfOldFieldValueGet: failed to get
old "
ERROR
pKeyBits: %s
DEBUG
nimfOldFieldValueGet: user has
changed MTU size
ERROR
pRootEnable: %s
DEBUG
nimfAdvOptSetWrap: failed to get old
Port Speed "
ERROR
pRsaEnable: %s
DEBUG
nimfAdvOptSetWrap: user has
changed Port Speed
ERROR
pDsaEnable: %s
DEBUG
nimfAdvOptSetWrap: failed to get old
Mac Address "
ERROR
pPassEnable: %s
DEBUG
nimfAdvOptSetWrap: user has
changed Mac Address "
ERROR
pEmptyPassEnable: %s
DEBUG
nimfAdvOptSetWrap: unable to get
Mac Address
ERROR
pSftpEnable: %s
DEBUG
nimfAdvOptSetWrap:Failed to RESET
the flag
ERROR
pScpEnable: %s
DEBUG
nimfAdvOptSetWrap: setting
advanced options failed
ERROR
pSshdEnable: %s
DEBUG
nimfAdvOptSetWrap: interface
advanced options applied
ERROR

Rate

124.8 / 5 based on 304 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top