Page 31 / 39 Scroll up to view Page 26 - 30
31
Networking Basics (continued)
Checking the IP Address in
W
indows XP
This
window will appear.
Click the
Support
tab.
Click
Close
.
±
±
Assigning a Static IP Address in
W
indows XP/2000
Note: DHCP-capable gateways/broadband routers will automatically assign IP addresses
to the computers on the network, using DHCP (Dynamic Host Configuration Protocol)
technology. If you are using a DHCP-capable gateway/router you will not need to assign
static IP addresses.
If you are not using a DHCP capable gateway/router, or you need to assign a static IP
address, please follow these instructions:
±
±
Go to
Start
.
Double-click on
Control Panel
.
Page 32 / 39
32
Networking Basics (continued)
Assigning a Static IP Address in
W
indows XP/2000
±
Double-click on
Network
Connections
.
±
±
Click on
Properties
.
Right-click on
Local Area
Connections
.
Page 33 / 39
33
Select
Use the following
DNS server addresses
.
Enter the LAN IP address of
the router. (D-Link routers
have a LAN IP address of
192.168.0.1).
Networking Basics
(continued)
Assigning a Static IP
Address
in
Windows XP/2000
You have completed the assignment of a
static IP address. (You do not need to as-
sign a static IP address if you have a DHCP-
capable gateway/router).
Click on
Internet Protocol
(TCP/IP)
.
Click
Properties
.
±
±
IP Address:
e.g., 192.168.0.2
Subnet Mask:
255.255.255.0
Default Gateway:
Enter the LAN IP address
of the router. (D-Link
routers have a LAN IP
address of 192.168.0.1).
In the window below, select
Use the following IP
address
. Input your
IP address and subnet mask.
(The IP addresses on
your network must be within the same range. For example, if one computer
has an IP address of 192.168.0.2, the other computers should have IP
addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet
mask must be the same for
all the computers on the
network).
±
±
±
Click
OK
.
Page 34 / 39
34
Networking Basics (continued)
Checking the Network Connection by Pinging in
Windows XP/2000
Checking the Network Connection by Pinging in
Windows Me / 98SE
Go to
Start
>
Run
>
type
cmd
. A window
similar to this one
will appear. Type
ping
xxx.xxx.xxx.xxx
,
where
xxx
is the
IP
address
of the
router. A good
network connection
will show four replies
from the router, as
shown.
Go to
Start
>
Run
>
type
command
.
A
window similar to
this will appear.
Type
ping
xxx.xxx.xxx.xxx
where
xxx
is the
IP
address
of the
router. A good
netowrk connection
will show four replies
from the router, as
shown.
±
±
Page 35 / 39
35
UPnP
TM
(Windows/UPnP
TM
-enabled)
IEEE 802.3
IEEE 802.3u
±
Standards
±
Technical Specifications
±
Web-based - Internet Explorer 5.0 or above, Apple Safari, Linux
Nautilus, or Netscape 6.2.x or above.
Management
±
LEDs
Warranty:
One year
±
0.86 lbs (388g)
±
Weight:
Physical Dimensions:
L = 7.56 inches (192mm)
W = 4.57 inches (116mm)
H = 1.18 inches (30mm)
±
±
±
Rendezvous (Mac OS X)
±
Temperature:
Power
±
HDD (Hard Drive Disk)
±
LAN
±
Status
±
DHCP Client
±
±
Operating Temperature: 32°F to 149°F (0°C to 55°C)
Storing Temperature: -4°F to 158°F (-20~70°C)
±
5%~90% non-condensing
±
Humidity:
External Power Supply DC 5V, 2.5A
±
Power Input:
Safety & Emissions:
±
FCC Part 15 Class B
UL
±

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top