1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSL-G604T
    5. /
  5. 5
Page 21 / 92 Scroll up to view Page 16 - 20
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
6.
Click
twice to confirm and save your changes, and then close the Control Panel.
21
Page 22 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Windows Me
1.
In the Windows task bar, click the Start button, point to
Settings
, and then click
Control Panel
.
2.
Double-click the Network and Dial-up Connections icon.
3.
In the Network and Dial-up Connections window, right-click on the Network icon, then select
Properties
.
4.
The Network Properties dialog box displays with a list of currently installed network
components. If the list includes Internet Protocol (TCP/IP), then the protocol has already been
enabled. Skip to step 3.
5.
If Internet Protocol (TCP/IP) does not display as an installed component, click
.
6.
In the Select Network Component Type dialog box, select
Protocol
, and then click
.
7.
Select
Microsoft
in the Manufacturers box.
8.
Select
Internet Protocol (TCP/IP)
in the Network Protocols list, and then click
.
9.
You may be prompted to install files from your Windows Me installation CD or other media.
Follow the instructions to install the files.
10.
If prompted, click
to restart your computer with the new settings.
Next, configure the IP information:
1.
In the Control Panel, double-click the Network and Dial-up Connections icon.
2.
In Network and Dial-up Connections window, right-click the Network icon, and then select
Properties
.
3.
In the Network Properties dialog box, select
TCP/IP
, and then click
.
4.
In the TCP/IP Settings dialog box, click the
Specify IP address
option.
5.
Type in IP settings as follows,
IP address: 10.1.1.2
and
Subnet mask: 255.0.0.0.
6.
Click
twice to confirm and save your changes, and then close the Control Panel.
Windows 95, Windows 98 and Windows 98SE
1.
First, check for the IP protocol and, if necessary, install it:
2.
In the Windows task bar, click the Start button, point to
Settings
, and then click
Control Panel
.
3.
Double-click the Network icon.
4.
The Network dialog box displays with a list of currently installed network components. If the
list includes TCP/IP, and then the protocol has already been enabled. Skip to step 2.
5.
If TCP/IP does not display as an installed component, click
.
6.
The Select Network Component Type dialog box displays.
7.
Select
Protocol
, and then click
.
8.
The Select Network Protocol dialog box displays.
9.
Click on
Microsoft
in the Manufacturers list box, and then click
TCP/IP
in the Network
Protocols list box.
10.
Click
to return to the Network dialog box, and then click
again.
11.
You may be prompted to install files from your Windows 95/98 installation CD. Follow the
instructions to install the files.
12.
Click
to restart the PC and complete the TCP/IP installation.
Next, configure the IP information:
1.
Open the Control Panel window, and then click the Network icon.
2.
Select the network component labelled TCP/IP, and then click
.
22
Page 23 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
3.
If you have multiple TCP/IP listings, select the listing associated with your network card or
adapter.
4.
In the TCP/IP Properties dialog box, click the IP Address tab.
5.
Click the
Specify an IP address
option.
6.
Type in IP settings as follows,
IP address: 10.1.1.2
and Subnet mask:
255.0.0.0.
7.
Click
twice to confirm and save your changes.
8.
You will be prompted to restart Windows.
9.
Click
.
Windows NT 4.0
1.
First, check for the IP protocol and, if necessary, install it:
2.
In the Windows NT task bar, click the Start button, point to
Settings
, and then click
Control
Panel
.
3.
In the Control Panel window, double click the Network icon.
4.
In the Network dialog box, click the Protocols tab.
5.
The Protocols tab displays a list of currently installed network protocols. If the list includes
TCP/IP, then the protocol has already been enabled. Skip to step 3.
6.
If TCP/IP does not display as an installed component, click
.
7.
In the Select Network Protocol dialog box, select
TCP/IP
, and then click
.
8.
You may be prompted to install files from your Windows NT installation CD or other media.
Follow the instructions to install the files.
9.
After all files are installed, a window displays to inform you that a TCP/IP service called DHCP
can be set up to dynamically assign IP information.
10.
Click
to continue, and then click
if prompted to restart your computer.
Next, configure the IP information:
1.
Open the Control Panel window, and then double-click the Network icon.
2.
In the Network dialog box, click the Protocols tab.
3.
In the Protocols tab, select
TCP/IP
, and then click
.
4.
In the Microsoft TCP/IP Properties dialog box, click the
Specify an IP address
option.
5.
Type in IP settings as follows,
IP address: 10.1.1.2
and Subnet mask:
255.0.0.0.
Click
twice to confirm and save your changes, and then close the Control Panel.
Accessing the Configuration Manager
Now that your computer’s IP settings allow it to communicate with the Router, you can access the
configuration software.
Note:
Be sure that the web browser on your computer is not configured to use a proxy server in
the Internet settings. In Windows Internet Explorer, you can check if a proxy server is enabled
using the following procedure:
1. In Windows, click on the
Start
button, go to
Settings
and choose
Control Panel
.
2. In the
Control Panel
window, double-click on the
Internet Options
icon.
3. Click the
Connections
tab and click on the
LAN Settings
button.
4. Verify that the “Use proxy server” option is NOT checked. If it is checked, click in the checked
box to deselect the option and click OK.
Alternatively you can access this
Internet Options
menu using the
Tools
pull-down menu in
Internet Explorer.
23
Page 24 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
To use the web-based management software, launch a suitable web browser and direct it to the IP
address of the Router. Type in
http://
followed by the default IP address,
10.1.1.1
in the address
bar of
the browser. The URL in the address bar should read:
. Once entered, the user will be
prompted to enter the username and password to access the Configuration Manager, as show below. A
new window will appear and you will be prompted for a user name and password to access the web-
based manager. Use the default user name “admin” and password “admin” for first time setup. You
should change the web-based manager access password once you have verified that a connection can
be established. The user name and password allows any PC within the same subnet as the Router to
access the web-based manger.
NOTE:
Do not confuse the user name and password used to
access the web-based manager with the ADSL account user
name and password needed for PPP connections to access the
service provider’s network.
Figure 3-1. Enter Network Password dialog box.
Configure the Router with the Configuration Wizard
The first page that appears after you successfully login displays information about the Router’s Setup
Wizard. Tabs across the top of the screen show other available menus:
Home
,
Advanced
,
Tools
,
Status
, and
Help
.
24
Page 25 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 3-2. Home – Setup
When the Router is used to provide Internet access it actually must first access your service provider’s
network, that is, it must communicate with computers and other modems owned by your service
provider. These computers and modems then provide access to the Internet. The Router must be
configured to communicate with the systems that give it access to the larger network. The quickest
way for you to connect to the Internet is by using the
Setup Wizard
. Click the
Run Wizard
button
the following window will appear:
25

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top