1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSL-6740U
    5. /
  5. 8
Page 36 / 158 Scroll up to view Page 31 - 35
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
Figure 24. The page for selecting the connection type.
On the opened page, select the needed choice of the radio button and click the
Next
button.
Figure 25. The page for selecting a port or interface.
On the opened page, select a port of interface to which the new connection will be assigned and
click the
Next
button.
Page
36
of 158
Page 37 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
Creating WAN Connection
PPPoE or PPPoA Connection
Figure 26. Configuring PPPoE WAN connection.
In the
Connection name
field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the
VPI
and
VCI
fields.
In the
Username
field, enter your login, and in the
Password
and
Password confirmation
fields – the password provided by your ISP.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page. After switching to the expert settings mode, the following sections
are displayed:
ATM
(for ADSL WAN connection),
Ethernet
(for Ethernet WAN connection),
PPP
,
Miscellaneous
, and
VLAN
.
Page
37
of 158
Page 38 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
Figure 27. Configuring PPPoE WAN connection. The expert settings mode. The
ATM
section.
Parameter
Description
Connection name
A name for connection for easier identification.
ATM
VPI
Virtual Path Identifier.
The valid range is from 0 to 250.
VCI
Virtual Circuit Identifier.
The valid range is from 32 to 65535.
Encapsulation Mode
Select
LLC
or
VC
from the drop-down list.
QoS
A class of traffic for this connection.
UBR
(
Unspecified Bit Rate
): The UBR service is used for applications
that allow various delays and losses of packets. It is appropriate to
use the UBR service for text/data/image transfer applications, as
well as messaging, distribution, retrieval, and remote terminal
applications.
UBR With PCR
(
Unspecified Bit Rate with Peak Cell Rate
): The UBR service is
used for applications that allow various delays and losses of packets.
The Peak Cell Rate is a determining factor in how often cells are
sent in an effort to minimize lag or jitter caused by traffic
Page
38
of 158
Page 39 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
inconsistencies. When you select this value from the drop-down list,
the
Peak Cell Rate
field is displayed. Specify a required value (in
cells per second).
CBR
(
Constant Bit Rate
): This service is used for applications that
require a constant data rate. It is mostly used for transferring
uncompressed audio and video, e.g. videoconferencing, interactive
audio (telephony), audio/video distribution (television, distance
education, e-shops), and retrieval (video-on demand, audio
libraries). When you select this value from the drop-down list, the
Peak Cell Rate
field is displayed. Specify a required value (in
cells per second).
Non Realtime VBR
(
Non-Real-time Variable Bit Rate
): This service can be used for
transferring data that have critical response-time requirements, e.g.
air ticket booking, bank transactions, and process monitoring. When
you select this value from the drop-down list, the
Peak Cell Rate
,
Sustainable Cell Rate
, and
Maximum Burst Size
fields are
displayed. Specify required values.
Realtime VBR
(
Real-time Variable Bit Rate
): This service is used for delay-
sensitive applications such as real time video. The Rt-VBR provides
higher network flexibility than the CBR service. When you select
this value from the drop-down list, the
Peak Cell Rate
,
Sustainable Cell Rate
, and
Maximum Burst Size
fields are
displayed. Specify required values.
Page
39
of 158
Page 40 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
Figure 28. Configuring PPPoE WAN connection. The expert settings mode. The
Ethernet
section.
Parameter
Description
Ethernet
MTU
The maximum size of units transmitted by the interface.
MAC
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
Page
40
of 158

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top