Page 71 / 158
Scroll up to view Page 66 - 70
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
WAN Status
The
Status / WAN status
page displays active WAN connections.
Figure 52. The
Status / WAN status
page.
Page
71
of 158
Page 72 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
DHCP
The
Status / DHCP
page displays the information on computers that have been identified by
hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as
well as the IP address expiration periods (the lease time).
Figure 53. The
Status / DHCP
page.
Page
72
of 158
Page 73 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
Routing Table
The
Status / Routing table
page displays the information on routes. The table contains
destination IP addresses, gateways, subnet masks, and other data.
Figure 54. The
Status / Routing table
page.
Page
73
of 158
Page 74 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
Clients
On the
Status / Clients
page, you can view the list of devices connected to the router and devices
accessing its web-based interface.
Figure 55. The
Status / Clients
page.
For each device the following data are displayed: the IP address, the MAC address, and the
interface to which the device is connected.
The
Clear all
button allows to clear the router's ARP table. It includes the MAC addresses of the
devices connected to the router before and IP addresses assigned to them. The MAC addresses of
the devices connected to the router in the bridge mode are not deleted.
Page
74
of 158
Page 75 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
Net
In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).
WAN
On the
Net
/ WAN
page, you can create and edit connections used by the router.
Figure 56. The
Net / WAN
page.
To create a new connection, click the
Add
button. On the page displayed, specify the relevant
values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed,
change the parameters and click the
Save
button.
To delete an existing connection, left-click the relevant line in the table. On the page displayed,
click the
Delete
button.
To use one of existing WAN connections as a default gateway, select the choice of the
Default
gateway
radio button located in the line corresponding to this connection.
See an example of creating several connections in the
Creating Two Connections on One Channel
section, page 153.
Page
75
of 158
19216811.live