Page 81 / 114
Scroll up to view Page 76 - 80
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 79
Samba
Samba allows you to enable USB storage samba.
Samba:
Active or deactivate samba function for the router.
Work Group:
Enter work group for the samba function.
Net BIOS Name:
Enter the Net BIOS name for the samba.
User account:
Enable or disable settings of the samba account.
New Password:
Enter new password for the samba function.
Confirm Password:
Enter confirm password for the samba function.
Click
SAVE
button to commit the configuration.
Page 82 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 80
Routing
To access the
Routing
page, click on the
Advanced
menu link at the top, and then click on the
Routing
menu link on the left.
Routing protocols specify the ways (routes) of data packets in your LAN and in the
Internet. Normally all out-bound data packets from your LAN will be send via a
gateway, e.g. the DSL-2877AL, to the server of your ISP and into the internet
accordingly. As the internet is based on packet-switching protocols, the way for each
data packet is determined on every network knot anew.
Using Routing Tables you can assign routes for data packet into sub networks of your
LAN.
The Static Routing Method is simple and therefor often used. Each knot maintains a
table with one line for every possible destination knot. Every line holds information
about which connection is best, second, etc. and a weight.
If a data packet has to be routed to a certain destination knot a connection according
to the information is chosen, depending on the weight information as a chance to
choose especially this connection.
Page 83 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 81
Static Routing
In this section, the following parameters can be configured:
Destination Address:
Input the Destination Address.
Destination Subnet Mask:
Input Destination Subnet Mask.
Gateway IP Address:
Click either radio Button to input a gateway address or select
from a drop down menu.
Metric:
Input routing metric here.
In this section a list of static route entries will be displayed.
Click the
Add
button to add a new entry.
Select the
Remove
option and click the
Remove
button to remove the specific entry.
Page 84 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 82
RIP
The routing information protocol (RIP) is one of the most commonly used interior
gateway protocol (IGP) routing protocols on internal networks (and to a lesser
extent, networks connected to the Internet), which helps routers dynamically adapt
to changes of network connections by communicating information about which
networks each router can reach and how far away those networks are.
There is no need to activate this option normally.
Page 85 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 83
URL Redirect
To access the
URL Redirect
page, click on the
Advanced
menu link at the top, and then click on the
URL Redirect
menu link on the left.
On this page the user can configure services related to the URL Redirect feature of
this product.
URL Redirect is to notify user the current URL is blocked by MAC filter or URL filter.
Select this option to enable or disable the URL Redirect feature.
This page to notify the user of the current URL is blocked by MAC filter or URL filter.
19216811.live