Page 131 / 143
Scroll up to view Page 126 - 130
D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.
Page 131
Wireless Table
To access the Error! Not a valid bookmark self-reference.
Table
page, click on the
Status
menu link, at the top, and then click on the
Wireless Table
menu link, on the left.
On this page, the user can view authenticated wireless stations and their status.
In this section, we can view Wireless 2.4G stations and their status.
In this section, we can view Wireless 5G stations and their status.
Page 132 / 143
D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.
Page 132
Internet Session
To access the
Internet Session
page, click on the
Status
menu link, at the top, and then click on the
Internet Session
menu link, on the left.
On this page, the user can view full details of active internet sessions to your router.
In this section, we can view internet session list.
Page 133 / 143
D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.
Page 133
Storage Service
To access the
Storage Service
page, click on the
Status
menu link, at the top, and then click on the
Storage Service
menu link, on the left.
On this page, the user can configure services related to the Storage Services of this
product.
In this page, we can view information about the USB storage device that is inserted
into the USB port of this router.
Page 134 / 143
D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.
Page 134
Help Category
The
Help
category is designed to assist the user with helpful information about every topic found on the web user interface of this product.
The following pages can be found in the
Help
category:
Menu
–
On this page, the user can navigate easily to any page throughout
the menu structure to access help information.
Setup
–
On this page, the user can read more about topics discussed in the
Setup category.
Advanced
–
On this page, the user can read more about topics discussed in
the Advanced category.
Maintenance
–
On this page, the user can read more about topics discussed
in the Maintenance category.
Status
–
On this page, the user can read more about topics discussed in the
Status category.
Page 135 / 143
D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.
Page 135
Knowledge Base
Networking Basics
Check your IP address
After you installed your new network or wireless adapter, by default, the TCP/IP
settings should be set to obtain an IP address automatically from a DHCP server. By
default the DHCP server option on your router is enabled.
To verify your IP address, please follow the steps below:
Click on the Windows
Start
button and open the
Run
application.
In the
Open
box type
cmd
and click
OK
.
At the command prompt, type in the command
ipconfig
and press
Enter
. This
will display the
IP address
,
Subnet Mask
, and the
Default Gateway
of your
adapter. If the address is
0.0.0.0
, it means that your network adapter did not
receive an IP address from the DHCP server. Check your adapter installation,
security settings, and the settings on your router. Some firewall software
programs may block a DHCP request on newly installed adapters.
19216811.live