D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 8 - Maintenance
Access Control
Account Password
In this section, you can modify your router’s password which is needed to access the Web management Interface. It is recommended that you
change the factory default password for security purposes. To change your password, choose between 1 and 16 characters.
Page 77 / 97
77
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 8 - Maintenance
Services
In this page, you will be able to enable or disable services from being used.
Page 78 / 97
78
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 8 - Maintenance
IP Address
This page allows you to restrict users from accessing the local management using IP address.
Check
Enable Access
Control Mode
to access local
management services from IP addresses contained in the Access Control List. If Access Control Mode is disabled, the system will not validate IP
addresses for incoming packets.
Note:
Add your IP address to the list before you enable the service.
Page 79 / 97
79
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 8 - Maintenance
Diagnostics
This page displays your router’s self diagnostic and connection test results.The internet connectivity status will only show PASS if you have correctly
configured your Internet connection and if your router is currently online.
Page 80 / 97
80
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 8 - Maintenance
System Log
The System Log screen allows you to view the system log and configure the system log options.
19216811.live