Page 96 / 109
Scroll up to view Page 91 - 95
Section 3 – Configuration
D-Link DSL-2642B User Manual
95
IP Address
To access IP Address, point to the
Access Controls
on the left window and click
IP Address
submenu, or click the
IP Address
button in the
Access Controls window.
Click
Add
to see the Add IP Address section. Enter an IP address and
click
Apply
in the section. The IP address will show in the table in the
Remote Web and Telnet Management section. Tick the
Enable Access
Control Mode
check box and click
Apply
in this section to enable the
function.
Page 97 / 109
Section 3 – Configuration
D-Link DSL-2642B User Manual
96
Diagnostics
To access the Diagnostic window, click the
Diagnostics
button in the
Maintenance
directory.
This window is used to test connectivity of the Router. A Ping test may
be done through the local or external interface to test connectivity to
known IP addresses. The diagnostics feature executes a series of tests
of your system software and hardware connections. Use this window
when working with your ISP to troubleshoot problems.
Page 98 / 109
Section 3 – Configuration
D-Link DSL-2642B User Manual
97
System Log
To access the System Log window, click the
System Log
button in the
Maintenance
directory.
The system log allows you to configure local and remote logging, and to
view the logs that have been created.
To generate a system log, tick the
Enable Remote Log
check box.
Select the
Log Level
and
Display Level
from the drop-down lists. The
levels available are the same for each type of level: Emergency, Alert,
Critical, Error, Warning, Notice, Informational and Debugging. Click the
Apply
button to allow your new settings to take effect.
Page 99 / 109
Section 3 – Configuration
D-Link DSL-2642B User Manual
98
Status
Use the various read-only windows to view system information and monitor performance.
Device Info
To access the Device Info window, click the
Device Info
button in the
Status
directory.
Use this window to quickly view basic current information about the LAN
and WAN interfaces and device information including Firmware Version
and MAC address.
Page 100 / 109
Section 3 – Configuration
D-Link DSL-2642B User Manual
99
Wireless Clients
To access the Wireless Clients window, click the
Wireless Clients
button in the
Status
directory.
The page displays the authenticated wireless stations and their status.
Click the
Refresh
button to update the status.
DHCP Clients
To access the DHCP Clients window, click the
DHCP Clients
button in the
Status
directory.
The Connected LAN Clients list displays active DHCP clients when the
Router is acting as a DHCP server. Click the
Refresh
button to update
the status.
19216811.live