to add an inbound IP filter. The page as shown in the figure appears.
Enter the
Filter Name
and specify at least one of the following criteria: protocol,
source/destination IP address, subnet mask, and source/destination port.
Then, click
Apply
to save the settings.
Note:
The settings apply only when the firewall is enabled.
The
ACTIVE INBOUND FILTER
in the
INCOMING IP FILTERING
page displays detailed
information of each created inbound IP filter. Click
Delete
to delete an IP filter. Note that
the
Delete
button appears only when at least one IP filter exists.
Page 53 / 91
Web Configuration
D-Link DSL-2640B User Manual
49
Outbound IP Filtering
By default, all outgoing IP traffic from the LAN is allowed. The outbound filter allows you to create a filter rule to block outgoing IP traffic by specifying a filter name and at
least one criterion.
In the
FILTERING OPTIONS
page, click
Outbound IP Filtering
. The
OUTGOING IP
FILTERING
page as shown in the figure appears.
Page 54 / 91
Web Configuration
D-Link DSL-2640B User Manual
50
Click
Add
to add an outbound IP filter. The page as shown in the figure appears.
Enter the
Filter Name
and specify at least one of the following criteria: protocol,
source/destination IP address, subnet mask, and source/destination port. Click
Apply
to
save the settings.
The
ACTIVE OUTBOUND FILTER
in the
OUTGOING IP FILTERING
page displays
detailed information OF each created outbound IP filter. Click
Delete
to delete an IP filter.
Note that the
Delete
button appears only when at least one IP filter exists.
Page 55 / 91
Web Configuration
D-Link DSL-2640B User Manual
51
Bridge Filtering
In the
FILTERING OPTIONS
page, click
Bridge Filtering
. The page as shown in the figure
appears.
This page is used to configure bridge parameters. In this page, you can modify the settings
or view the information of the bridge and its attached ports.
19216811.live