Page 21 / 69
Scroll up to view Page 16 - 20
Section 3 – Configuration
D-Link DSL-2540U User Manual
21
This window displays the Router’s ADSL statistics. Click the
Reset
Statistics
button to refresh these statistics.
Click the
ADSL BER Test
button to access the ADSL Bit Error Rate Test
window displayed below:
Page 22 / 69
Section 3 – Configuration
D-Link DSL-2540U User Manual
22
Route
To access the
Device Info – Route
window, click the
Route
button in the
Device Info
directory.
This read-only window displays routing info.
ARP
To access the
Device Info – ARP
window, click the
ARP
button in the
Device Info
directory.
This read-only window displays Address Resolution Protocol info.
DHCP
To access the
Device Info – DHCP Leases
window, click the
DHCP
button in the
Device Info
directory.
This read-only window displays DHCP lease info.
Page 23 / 69
Section 3 – Configuration
D-Link DSL-2540U User Manual
23
Quick Setup
This chapter is concerned with using your computer to configure the WAN connection. The following chapter describes the various windows used to
configure and monitor the Router including how to change IP settings and DHCP server setup.
QUICK SETUP
Click the
Quick
Setup
link on the left panel of the opening page to launch
a series of setup windows.
Tick the DSL Auto-connect check box and then click the
Next
button.
If the ADSL connection is down, unselect the DSL Auto-connect checkbox
and then click the
Next
button to manually assign VPI and VCI values.
Page 24 / 69
Section 3 – Configuration
D-Link DSL-2540U User Manual
24
QUICK SETUP
This window allows you to set up ATM PVC configuration. Enter a Port
Identifier, Virtual Path Identifier, and Virtual Channel Identifier. The VPI
and VCI values should be provided by your ISP. This window also allows
you to enable QoS by ticking the Enable Quality of Service check box.
Click the
Next
button to continue.
QUICK SETUP – CONNECTION TYPE
This window allows you to select the appropriate connection type. The
choices include PPP over ATM (PPPoA), PPP over Ethernet (PPPoE),
MAC Encapsulation Routing (MER), IP over ATM (IPoA), and Bridging
(default).
This window also allows you to use the drop-down menu to select the
desired Encapsulation Mode. Click the
Next
button to continue.
Page 25 / 69
Section 3 – Configuration
D-Link DSL-2540U User Manual
25
QUICK SETUP – BRIDGING
To enable bridging, tick the Enable Bridge Service check box and enter a
Service Name.
To disable WAN service, unselect the check box.
Click the
Next
button to continue.
QUICK SETUP – BRIDGING
This window allows you to configure the Router IP address and subnet
mask for your LAN. Once you have entered an IP address and subnet
mask, click the
Next
button to continue.
QUICK SETUP – BRIDGING
This summary window allows you to confirm the bridging settings you
have just made. Click the
Save/Reboot
button to save your new bridging
settings and restart the Router.
19216811.live