Page 101 / 154
Scroll up to view Page 96 - 100
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 101
In this section a list of static route entries will be displayed.
Click the
Add
button to add a new entry.
Select the
Remove
option and click the
Remove
button to remove the specific entry.
Page 102 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 102
Default Gateway
Click the
Default Gateway
button to access the
Default Gateway
configuration
page.
After clicking the
Default Gateway
button the following page is available.
Page 103 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 103
In this section we can select the default gateway interface for this router.
Selected WAN Interface:
Select the IPv4 WAN interface that will be used here.
Selected Default Gateway Interfaces:
Select the IPv6 WAN interface that will be
used here.
Available Routed WAN Interfaces:
Select a Routed WAN interface.
Click the
Apply/Save
button to accept the changes made.
Click the
Cancel
button to discard the changes made and return to the main page.
In this section we can configure the default gateway parameters for this router.
Gateway Address:
Enter the primary gateway IP address used here.
Alternative Gateway:
Enter the secondary gateway IP address used here.
Periodic Time:
Enter the periodic time value here.
Click the
Ping
button to initiate the gateway IP check.
Click the
Stop
button to terminate the gateway IP check.
RIP
Click the
RIP
button to access the
RIP
configuration page.
Page 104 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 104
After clicking the
RIP
button the following page is available.
In this section we can configure the default gateway parameters for this router.
Version:
Select the RIP version number here. Options to choose from are
1
,
2
, and
Both
.
Operation:
Select the operation mode here. Options to choose from are
Active
and
Passive
.
Enable:
Tick this option to enable the RIP configuration on the specified interface.
Click the
Apply/Save
button to accept the changes made.
Page 105 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 105
DLNA
To access the
DLNA
page, click on the
Advanced
menu link, at the top, and then click on the
DLNA
menu link, on the left.
On this page the user can configure services related to the Digital Living Network
Alliance (DLNA) feature of this product.
In this section we can configure the print server parameters for this router.
Enable on-board digital media server:
Tick this option to enable the onboard
digital media server.
Click the
Apply/Save
button to accept the changes made.
19216811.live