Page 71 / 154
Scroll up to view Page 66 - 70
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 71
In this section a list of Outbound IP filtering rules will be displayed.
Click the
Add
button to add a new rule.
Select the
Remove
option and click the
Remove
button to remove the specific rule.
After clicking the
Add
button the following page is available.
In this section we can create a new Outbound IP filter rule.
Filter Name:
Enter the Outbound filtering rule name here.
IP Version:
Select the IP version from the list. Options to choose from are
IPv4
and
IPv6
.
Protocol:
Select the protocol used from the list. Options to choose from are
TCP/UDP
,
TCP
,
UDP
, and
ICMP
.
Source IP address:
Enter the source IP address here.
Source Port:
Enter the source port number here.
Destination IP address:
Enter the destination IP address here.
Destination Port:
Enter the destination port number here.
Click the
Apply/Save
button to accept the changes made.
Click the
Cancel
button to discard the changes made and return to the main page.
In this section a list of Outbound IP filtering rules will be displayed.
Click the
Add
button to add a new rule.
Select the
Remove
option and click the
Remove
button to remove the specific rule.
Page 72 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 72
Bridge Filtering
Click the
Bridge Filtering
button to access the
Bridge Filtering
rule configuration
page.
After clicking the
Bridge Filtering
button the following page is available.
MAC Filtering is only effective in Bridge mode.
FORWARDED
means that all MAC
layer frames will be
FORWARDED
except those matching with any of the specified
rules in the following table.
BLOCKED
means that all MAC layer frames will be
BLOCKED
except those matching with any of the specified rules in the following
table.
Page 73 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 73
In this section we will find the current
Policy
status as well the option to change this
option.
Select the
Change
tick box and click the
Change Policy
button, to change the Bridge
MAC filtering policy.
After selecting the
Change
option and clicking the
Change Policy
button. The policy
will be changed.
WARNING:
Changing from one policy to another of an interface will cause all defined
rules for that interface to be
REMOVED AUTOMATICALLY
! You will need to create
new rules for the new policy.
In this section we can see a list of MAC filtering rule created.
Click the
Add
button to add a new rule.
Select the
Remove
option and click the
Remove
button to remove the specific rule.
Page 74 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 74
After clicking the
Add
button, the following page will be available.
Page 75 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 75
In this section we can configure the MAC filtering rule.
Parameters available for configuration are:
Protocol Type:
Select the protocol type option that will be associated with this rule.
Options to choose from are
PPPoE
,
IPv4
,
IPv6
,
IPX
, and
IGMP
.
Destination MAC Address:
Enter the destination MAC address used here.
Source MAC Address:
Enter the source MAC address used here.
Frame Direction:
Select the
Frame Direction
from the drop-down menu. Select
between
LAN /WAN
,
WAN/LAN
, or
LAN to WAN
.
WAN Interface:
Select the WAN interface that will be associated with this rule here.
Click the
Save/Apply
button to accept the changes made.
After the rule was added, it will be displayed in this section.
19216811.live