Page 51 / 93
Scroll up to view Page 46 - 50
5
1
Using the Configuration Utility (continued)
Network Configuration > Proxy Server Properties
By default, only port 80 is allowed. It will appear on the login Web page. If you have
built a Proxy Server in your network environment, and the user’s browser is set to
Proxy, you must set your External Proxy Server IP address and Proxy Port in this
section fo the configuration in order to operate in the Proxy network environment.
Internal Proxy Server:
Enable this function to configure the DSA-5100 as a proxy server.
External Proxy Server:
Page 52 / 93
5
2
Using the Configuration Utility (continued)
Utilities > Change Password
DSA-5100 provides 2 built-in user accounts:
admin
and
manager
.
admin:
This user is the administrator in the DSA-5100.
manager:
This user has the right to manage a user account, the admin functions are
denied.
The
admin
and
manager
can change their passwords; specify the current password
first. The new password must be entered twice.
Note:
If you lost or forgot the Administrator’s Password, you can
reset it through the text mode management interface of the serial
port.
Page 53 / 93
5
3
Using the Configuration Utility (continued)
Utilities > Backup/Restore Strategy
This utility provides the backup function, and the ability to restore backup settings.
This function can also restore the factory default settings to the system.
Create Backup Image:
Create:
Generate the backup (image) file.
Restore Settings From File:
Browse:
Browse for the backup file.
Restore:
Click to load the selected backup file
for the setup status.
Reset to
t
he
Factory
-
Default
R
estore to the factory default setting of the system.
Setting:
(
Caution:
The image file must be generated by the
the system).
Page 54 / 93
5
4
Using the Configuration Utility (continued)
Utilities > Firmware Upgrade
You may obtain firmware upgrades from D-Link’s support website:
Warning:
A Firmware upgrade may cause data loss on setup. Please
refer to the version description to see if there is any limitation before
upgrading your firmware.
Click
Browse
to browse the files. After you have found the firmware, click
Submit
and
the browser will upload the file to the system. The system will start upgrading the
firmware.
You must restart the system before the firmware upgrade is effective. If you have
modified any setting, remember to save the setting before restarting the system.
Warning:
Please restart the system through the management
interface. Do not turn off the system directly and then turn on the
power again. (Doing so may damage the unit.)
Utilities > Restart
This function allows you to safely restart the system. It takes about one minute.
If you need to turn OFF the power, we recommend that you first RESTART
the system, and then turn OFF the power, AFTER you hear a beep.
OFF:
Warning:
All online users connected to the system will be
disconnected when the system is restarted.
Page 55 / 93
5
5
Using the Configuration Utility (continued)
Status> System Status
You can use this function to get the overview of the system status. Please refer to the
following example.
19216811.live