DSA-3200 Wireless Service Gateway User Manual

10

the user may freely browse the Internet until the account expires or their connection

remains idle longer than allowed. Limits may be imposed on how long an account may

be or the length of time a connection remains idle before it is terminated or even the

maximum bandwidth available to the authenticated user.

The DSA-3200 manages all network data that passes through it. Users under the

managed network must authenticate in order to access any network resources. User

authentication is processed via the DSA-3200 Web server with or without SSL

encrypted links. When a user is prompted to login, the DSA-3200 will check the user

database to confirm the user’s access rights. In addition to the internal User database

for local and On-demand users, the DSA-3200 may query any external RADIUS

Server to authenticate and authorize user credentials. If the user fails to successfully

authenticate, the DSA-3200 will refuse access and continue to prompt for user log in. If

the Administrator so chooses, a list of URLs may be provided for free access to users

that have not yet authenticated. Once the user authenticates successfully, the

DSA-3200 will grant limited access based on the group membership of the user and

redirect the web-browser to the administrator defined URL.

The DSA-3200 can be configured to terminate user access if a user requests to log out

or remains idle longer than the configured idle time. Limits can be placed on user

session length as well as maximum bandwidth available to specific user groups.

The system is responsible for user authentication, authorization and management.

The user account information is stored in the local database, or a specified external

databases server. The user authentication is processed via the SSL encrypted web

interface. This interface is compatible to most desktop devices and the palm

computers.

3.3 Begin Installation

Please follow the Quick Installation Guide included with the DSA-3200 to

physically connect the device to the appropriate networks. The QIG also provides

instructions to configure the Network interfaces of the DSA-3200 using the Setup

DSA-3200 Wireless Service Gateway User Manual

11

Wizard. Following completion of the Setup Wizard, configurations pertaining to User

Authentication mechanisms, access privileges, and system management will need to

be made for a fully operational Hot Spot.

Once the Setup Wizard is complete, the DSA-3200 will restart.

Depending on what

configurations were made, it may be necessary to login to the Web-UI again. From a

PC connected to the Private LAN interface, open a Web-browser and enter

(the default Private LAN IP) into the address bar and hit enter.

The Administrator login page should load. Enter the appropriate credentials (default

username is admin password is admin) and click Enter.

.

DSA-3200 Wireless Service Gateway User Manual

12

4 Web Management Interface

This section gives a complete description of the Web Management Interface of the

DSA-3200 on a page-by-page basis.

The following table shows all configuration pages

where each column represents each of the Navigation Tabs and the configuration

pages available in each section.

Section

Home

Advanced

Tools

Status

Wizard

Authentication

Policies

Port and IP

Redirect

Device Info

System

Group

Virtual Server

Interface

WAN

Black List

Pass Through

Current Users

Public LAN

On-demand

User

Monitor IP List

Traffic History

Wireless LAN

Roaming

Free Surfing

Area

Notify

Private LAN

Additional

Proxy

DDNS

Change

Password

System

Firmware

Web-UI

Configuration

Page

Restart

DSA-3200 Wireless Service Gateway User Manual

13

4.1 Home

The Home Tab consists of System and Network Specific configurations.

All Interface

information such as IP configuration, DHCP Server configuration, and per port

Authentication features can be accessed through the Home Tab.

The Home section

provides the following interface configuration pages to further set up your Airspot

system:

Wizard, System, WAN, Public Network, Wireless, and Private Network.

Please refer to each section for more information.

DSA-3200 Wireless Service Gateway User Manual

14

4.1.1 Wizard

The Wizard will guide through the Interface setup of the DSA-3200.

All that is

needed is to follow the procedures and instructions as presented by the Wizard, step

by step, filling in all required values. Upon completion, restart the DSA-3200 to activate

any new settings.

Please refer to the Quick Installation Guide for detailed information about running the

Setup Wizard.