Page 96 / 113
Scroll up to view Page 91 - 95
DSA-3200 Wireless Service Gateway User Manual
95
6.
Choose
“Connect using a broadband connection that is always on”
, and
then click
“Next”
.
7.
Click “
Finish
” to exit the Connection Wizard. Now, you have completed the
setup.
Page 97 / 113
DSA-3200 Wireless Service Gateway User Manual
96
If the version of Windows operating system is not for servers, the default TCP/IP
settings will treat the PC as the DHCP client.
You can check the TCP/IP setup
according to the following procedure:
6.2
Configure TCP/IP in Windows 2000
1.
Select
Start - Console – Network and Dial-up Connections.
2.
Click the right button of the mouse on “
Local Area Connection
” icon to select
“
Properties
”.
Page 98 / 113
DSA-3200 Wireless Service Gateway User Manual
97
3.
Select
Internet Protocol (TCP/IP)
, and then click
“Properties”
.
Using DHCP
If you want to use DHCP, please select
“Obtain an IP Address Automatically”,
which is also the default setting of Windows.
Reboot the PC to make sure an IP
address is obtained from the DSA-3200.
Page 99 / 113
DSA-3200 Wireless Service Gateway User Manual
98
Using Static IP Address
If you have completed the setup for your PC, please inform the network administrator
before modifying the following setup.
1.
Click
“Advanced”
in the window of
Internet Protocol (TCP/IP).
2.
Click the “
IP Settings”
icon, and then
“Add”
in the
“Default Gateways”
column
to enter the IP address of the DSA-3200.
After this procedure is completed,
click
“Add”.
(You can ask the network administrator to give you the IP address
specified for the DSA-3200.)
Page 100 / 113
DSA-3200 Wireless Service Gateway User Manual
99
3.
If the DNS Server column is blank, please click
“Using the following DNS
Server Address”
in the window of Internet Protocol (TCP/IP), and then enter the
DNS address or the DNS address provided by ISP. After this procedure is
completed, click
“OK”
.
19216811.live