1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSA-3200
    5. /
  5. 15
Page 71 / 113 Scroll up to view Page 66 - 70
DSA-3200 Wireless Service Gateway User Manual
70
4.3.9 System Settings
The Systems Settings Page provides the ability to back up the current
configuration to the local HDD, restore the configuration from the local HDD, and/or
reset the device to factory default settings.
Create Backup Image:
Generate the backup (image) file. Click on the Hyperlink to
download to the local HDD.
Restore Settings From File:
Load a configuration file from the HDD by entering the
filename and path or Browse to the appropriate location on the local HDD.
Reset to Factory Default:
Restore to the factory default settings of the DSA-3200.
Page 72 / 113
DSA-3200 Wireless Service Gateway User Manual
71
4.3.10 Firmware Upgrade
One may upgrade the DSA-3200 firmware with any later version code obtained
from D-Link Systems, Inc. Support Site.
DSA-3200 Support Page
Warning:
Firmware upgrade may cause user data loss.
Please refer to the version
description or release notes to see if there is any limitation before upgrading your
firmware.
Click “
Browse
” to browse the local HDD for the appropriate firmware file. Upon
locating the appropriate firmware image file, click “
Submit
” and the browser will
upload the firmware file to the DSA-3200. Once the upload procedure has begun do
not disconnect power or attempt to access the DSA-3200 through another interface.
Doing so might interrupt the upgrade process rendering the flash image useless.
You must restart the system before the upgrade firmware is effective. If you have
modified any device settings, remember to save the setting before restarting the
system.
Warning:
Please restart the system through the management interface.
Do not
turn off the system directly and then turn on the power again.
Doing so may damage
the upgraded firmware.
Page 73 / 113
DSA-3200 Wireless Service Gateway User Manual
72
4.3.11 Restart
This function allows you to safely restart the DSA-3200. The restart procedure
takes approximately three minutes. If you need to remove power from the DSA-3200 it
is recommended to restart the DSA-3200 through this interface and remove power
after the status light is solidly lit.
Caution:
All online users connected to the system will be disconnected during the
system restart.
4.4 Status
The Status Section provides system information concerning device configuration
and user activity/usage statistics. The following configuration pages are explained in
detail in the following sections:
Device Info
,
Interface
,
Current Users
,
Traffic
History
and
Notify.
Page 74 / 113
DSA-3200 Wireless Service Gateway User Manual
73
4.4.1 Device Info
This section provides information regarding the current running version of code in
addition to management and essential systems configurations.
Page 75 / 113
DSA-3200 Wireless Service Gateway User Manual
74
Item
Description
Current Firmware Version
The firmware version currently used by DSA-3200
System Name
System name, and the default is DSA-3200
Admin Info
Administrator’s related information will be shown on the
login screen when a user has a connection problem.
Succeed Page
The starting web page after a user logs on successfully.
External SYSLog Server
IP address and port number of external SYSLog Server
Proxy Server
Proxy Server enabled or disabled.
Internet Connection
Status
When the
WAN
connection is abnormal (
Internet
Connection Detection
), all on-line users that open a
new browser will see Internet Connection Failure Info.
Remote Manage
IP
May be a specific IP address or IP Network enabled to
manage the DSA-3200 through the WAN port.
Manage
SNMP
Enable or disable SNMP management function
Retain Days
Max Number of days the user History will be stored
History
Email To
Send the history to this email address.
External Time
Server
The DSA-3200 uses NTP to obtain the latest and most
accurate time reading available.
Time
Date Time
The system time is local time.
User
Idle Logout Timer
Max number of minutes a user can be idle before logout
Primary DNS
Primary DNS Server IP Address
DNS
Secondary DNS
Secondary DNS Server IP Address
Login
User must click
“Login”
to execute the login procedure.
“
Enabled
” Indicates that after the first login users will
not need to supply username and password again.
Friendly
Logout
Upon user login, a small window will show the user’s
information and provide a logout button. “
Disable
”
indicates that closing the small window will not prompt
the user for logout verification.

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top