DSA-3200 Wireless Service Gateway User Manual

45

DSA-3200 Wireless Service Gateway User Manual

46

Filter Rule Item:

The filter rules obey Top Down evaluation to determine the

permission of a transmission from the source address to the target address or

examine whether there is a data loss. Click the

Index Number

for rule specific

configurations.

Rule Name:

Friendly name given to identify the rule and its intended action.

Enable this Rule:

Such rule will be effective when selected.

Action:

The basic behavior of the rule. If the rule parameters match, this action will be

taken.

Pass

：

The packet passes successfully.

Block

：

The packet is blocked and dropped.

Protocol

: Provides three common protocols: TCP, UDP, and ICMP.

The All option

will not discriminate based on packet protocol (protocols other than 1, 6, or 17).

Source MAC:

MAC Address of the Transmission Source. Leave blank to specify any.

Source (Destination) Interface:

Source (Destination) Interface includes 5 choices:

WAN, Wireless LAN, Public LAN, Private LAN, or ALL.

DSA-3200 Wireless Service Gateway User Manual

47

Source (Destination) IP Address:

IP address of Transmission Source (Destination).

Source (Destination) Subnet Mask:

Subnet Mask of Source (Destination).

Source (Destination) Start Port:

Start Port of Source (Destination).

Source (Destination) End Port:

End Port of Source (Destination).

±

Login Schedule Profiles - Edit

User login schedules may be configured to allow/disallow access during the specified

periods of time. Times corresponding to checkboxes will be enabled, unchecked

boxes indicate a disable or blocked status.

4.2.3 Black List Configuration

The DSA-3200 provides a black list function to block specified users from

accessing Network resources. Administrator can add to, delete from, or edit a specific

black list. Each blacklist may have at most 40 users. Users in the blacklist will be

denied access upon authentication attempt.

DSA-3200 Wireless Service Gateway User Manual

48

Click

“Add User to List”

to access the

Add Users to Blacklist

Menu.

Enter the username you wish to block and a remark, click

“Apply.”

To return to the

Black List Configuration,

click

“Prev.”

DSA-3200 Wireless Service Gateway User Manual

49

To delete a user from the black list, select the appropriate delete check box and click

the

“Delete”

button.

4.2.4 On-demand User Configuration

On-demand user:

When a DSA-3100P is connected to the DSA-3200’s console port,

2000 On-demand user accounts are made available. By default, the On-demand user

database is empty. Each time one presses the Printer’s Print button, an On-demand

user will be created and stored in the DSA-3200 while at the same time a receipt is

printed out with the user credentials and Wireless Network Information (SSID, WEP).

Caution

: After you delete a user, no message or request of confirmation will appear.