Page 6 / 12
Scroll up to view Page 1 - 5
6
D-Link DPR-1±60 Quick Install Guide
Wireless Settings
If you want to connect to a wireless network, click on the
Setup
tab
and then click
Wireless Settings
on the left side.
You will be asked to enter a password. Leave the box empty if you
have not set up a password.
Set the
Wireless on/off
to
On
. If you want to disable the
wireless feature, select
Off
.
Select the Wireless Network Name (SSID) from the drop-down menu.
If you do not see your network in the list, select
Enter Manually
and
enter the SSID.
If you are connecting to an access point or wireless router, select
Infrastructure
. If you are connecting directly to a computer with a
wireless adapter, click
Ad-Hoc
.
Select
None
(to use connect to an unsecure network),
WEP
, or
WPA.
Click
Save
to update your settings.
Open a web browser and enter
the following:
http://dlink-XXXXXX
XXXXXX
= the last six characters of your MAC address.
Page 7 / 12
µ
D-Link DPR-1±60 Quick Install Guide
WEP Encryption
It is recommended to enable encryption on your wireless router before
your wireless print server. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when
enabling encryption due to the added overhead.
1.
Log into the web-based
configuration (refer to page
5). Click on
Setup
and then
Wireless Settings
on the
left side.
2.
Next to
Security Mode
,
select
WEP
.
3.
Next to
Authentication
,
select
Shared Key
.
4.
Select either
64-bit
or
128-bit
encryption from the drop-down
menu next to
WEP Encryption
.
5.
Next to
Key 1
, enter a WEP key that you create. Make sure you
enter this key exactly on all your wireless devices. You may enter
up to 4 different keys.
6.
Click
Save Settings
to save your settings.
Page 8 / 12
¶
D-Link DPR-1±60 Quick Install Guide
WPA Encryption
It is recommended to enable encryption on your wireless router before
your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when
enabling encryption due to the added overhead.
1.
Log into the web-based
configuration (refer to
page 5).
2. Next to
Security Mode
,
select
WPA
.
3. Next to
Cipher Mode
,
select
TKIP, AES,
or
TKIP and AES
.
4. Next to
PSK
, enter a key (passphrase). The key is an
alpha-numeric password between 8 and 63 characters long. The
password can include symbols (!?*&_) and spaces. Make sure
you enter this key exactly the same as on your wireless router or
access point.
5. Click
Save
to save your settings.
Page 9 / 12
·
D-Link DPR-1±60 Quick Install Guide
D-Link Setup Wizard
Once you have successfully configured the wireless settings, you
are now ready to setup your network printer. You can disconnect
the Ethernet cable and configure the printer from a wireless
connection.
Note:
You will need to run this wizard from each computer that wishes
to use the printer.
To access the configuration utility, double-click on the
My Network
Places
icon on your desktop and then double-click on “DPR-1260:
dlink-xxxxxx”.
Windows
®
2000 users can open a web browser and enter
http://dlink-xxxxxx
(where xxxxxx is the last 6 characters of the print
server’s MAC address).
If you get a
Page Cannot be Displayed
error, please refer to the
Troubleshooting
section of the manual for assistance.
From the Status screen, click on the
Setup
tab, and then click
Next
to start the wizard.
Page 10 / 12
10
D-Link DPR-1±60 Quick Install Guide
Click the radio button next
to the printer you want to
configure. Click
Next
to
continue.
Click
Next
to continue.
You may need to insert
your printer driver CD to
load the drivers to your
computer.
If the autorun screen
appears when inserting
your printer driver CD, click
cancel or close.
Click
Finish
to complete
the setup wizard.
19216811.live