Page 141 / 154
Scroll up to view Page 136 - 140
136
Adding an IP Printer
To add an Internet Printing Protocol enabled, Line Printer Daemon enabled or HP
Jet Direct – Socket enabled printer, click the
button in the
Printer
Browser
window. Select a desired printing protocol from the
Protocol
drop-down
menu.
Page 142 / 154
137
Type the IP Address of the printer. The name will appear in the
Name
field when the
printer is found. The
Printer Browser
will indicate that it is verifying the address. If
the printer is found, the
Printer Browser
will state “Valid and complete address” in
the
Address
field.
The printer utility is able to detect the printer and may automatically select the
correct printer driver in the
Print Using
field. Or manually select the printer-maker
from the
Print Using
drop-down menu, and then select the printer model from the
scroll-down list, or select
Generic PostScrip Printer
option from the
Print Using
drop-down menu if the model is not listed. To implement the setting, click
Add
button.
The setup procedures for these three printing protocols (Internet Printing Protocol
(IPP), Line Printer Daemon (LPD), and HP Jet Direct – Socket) are basically the
same. Illustrated examples are include below for the sake of reference.
Page 143 / 154
138
For set up LPD Printing:
1.
Enter the IP address of the print server to which the printer is attached in
Address
field.
2.
Type the port name in the
Queue
field.
Click
Add
button after done the section of printer model in the
Print Using
drop-down menu.
Page 144 / 154
139
For set up IPP Printing:
1.
Enter the IP address of the print server to which the printer is attached in
Address
field. After that, type
“: 80”
or
“: second port”
if print server’s
second port is enabled.
2.
Type the port name in the
Queue
field.
Click
Add
button after done the section of printer model in the
Print Using
drop-down menu.
Page 145 / 154
140
For set up Socket Printing:
1.
Enter the IP address of the print server to which the printer is attached in
Address
field. After that, type
“: 9100”
for port 1,
“: 9101”
for port 2 or
“: 9102”
for port 3.
2.
Keep the blank in
Queue
field.
Click
Add
button after done the section of printer model in the
Print Using
drop-down menu.
19216811.live