Page 46 / 76
Scroll up to view Page 41 - 45
46
Once your computer has rebooted, click on
Start
> Settings
> Printers
> Add Printer
When
the
Add Printer Wizard
screen appears, Click
Next.
Select
Network Printer
.
Click
Next
Type in the path if you know it,
or Click
Browse.
TCP/IP Printing for Windows 98SE/Me
continued)
Page 47 / 76
47
TCP/IP Printing for Windows 98SE/Me
(continued)
At the next screen, browse for the printer
port. Highlight the port as shown. (The
Port
Name
in this window is just an example.)
Click
OK
If the network path is not specified, type in
the IP Address of the DP-311U and the
Port
Name.
(The
Port Name
shown at right is
just an example.)
Select
Yes
or
No
, to answer the question:
Do you print from MS-DOS based pro-
grams?
Click
Next
Click
Next
Click
Next
Highlight the printer, as shown. If the desired
printer is not on the list, click
Have Disk
and
insert the printer driver disk that came with
your printer to install the printer drivers.
Page 48 / 76
48
TCP/IP Printing for Windows 98SE/Me
(continued)
Select
Yes
to print
a test page.
Click
Finish
Go to Start >
Settings > Printers
Check to see that your
printer is installed.
Page 49 / 76
49
Unix/Linux Printing
Please refer to the
PS Admin Manual
on the CD included with your purchase for
information on setting up the Print Server in Unix/Linux.
Page 50 / 76
50
Setting up Apple Talk or LPR
Printing
in Mac OS X
At the
Configure
pull-down menu,
select
Manually
Open your
System
Preferences
window and Click
Network.
With Mac OSX you can use AppleTalk or LPR printers using IP protocols for printing
through Print Servers. Follow the instructions below for setting up the Print Server.
After attaching the Print Server to your network using the directions provided in the
Quick Installation Guide
, change the IP Address of your Macintosh to access the
Print Server’s web configuration.
Note: Mac OS printing with this print server is sup-
ported by Postscript printers only!
19216811.live