Page 21 / 80
Scroll up to view Page 16 - 20
21
Using the Web Configuration (continued)
Tools > Email (continued)
E-mail Notification
You can set the print server to send a message through E-mail
when the printer
status changes. To enable this function, set the
Enable e-mail notification
for printer status changing
option to
Yes
. Then, input the administrator’s Email
address in the
Admin E-mail Address
box.
E-mail Printing
E-mail Printing (ASCII Text Only):
Select
Enable
to enable the E-mail printing
function.
Receive E-mail Interval:
Enter the number in this box to set up the time (in
minutes) to check/receive E-mail regularly.
Test E-mail Account:
Click
Test
to send a test E-mail to the given administrator’s
Email address.
Receive E-mail:
Click
Yes
to immediately check and receive E-mail, and then
print out the mail when available.
Reset
Reset
Click
Apply
to
immediately reset
the print server.
Factory Reset
Click
Apply
to
reload the factory
settings of the print
server.
Page 22 / 80
22
Using the Web Configuration (continued)
Tools > Upgrade
Firmware Upgrade
When a new version of firmware is available (e.g., downloaded from the
manufacturer’s website), you can upgrade the firmware of your print server. Click
Browse
to locate the firmware file, then click
Apply
.
Page 23 / 80
23
Using the Web Configuration (continued)
Tools > Backup
Backup Device Configuration to File
Click
Apply
to backup your current configuration of the print server to file and
then
save in the computer.
Restore Device Configuration from File
You can reload a configuration that you saved before. Click
Browse
to point to
the backup file, and then click
Apply
.
Page 24 / 80
24
Help
Click on the
Help
link from the tools bar of the main screen to enter the Help Page,
it provides a link to D-Link’s support website.
D-Link’s support website will provide
the most up to date information on your DP-301U Print Server.
Please check the
website regularly for product and firmware updates.
Page 25 / 80
25
TCP/IP Printing for Windows XP
Open the web browser, and type in the IP Address of the DP-301U.
For example, type
into the
Location
or
Address
field. Press
the
Enter
or
(Return)
Key.
Note:
The PC’s IP Address must be in the same subnet as the Print Server’s IP
Address for the two devices to communicate. (For example, if your Print
Server’s IP Address is
192.168.0.10, with a subnet mask of 255.255.255.0,
then your computer’s IP Address should be 192.168.0.x, where x is a value
between 1-254, excluding 10.) See
Networking Basics: Assigning a Static IP
Address
in this manual to find out how to change an IP Address.
D-Link DP-301U
19216811.live