Page 126 / 150
Scroll up to view Page 121 - 125
122
The printer that has just been added will show up in the
Printer List
menu, it
might take a few seconds depending on network conditions. When the printer
appears listed it is ready for use. Quite the
Printer Setup Utility
and start printing.
Page 127 / 150
123
Adding an IP Printer
To add an Internet Printing Protocol enabled, Line Printer Daemon enabled or HP
Jet Direct – Socket enabled printer, click on the IP Printer button in the
Printer
Browser
window. Select the desired printing protocol from the
Protocol
drop-down menu.
Type the IP Address of the printer, the name will appear in the
Name
field when
the printer is found. The
Printer Browser
will indicate that it is verifying the
address. If the printer is found, the
Printer Browser
will state “Valid and complete
address” under the
Address
field.
Page 128 / 150
124
The printer utility is able to detect the printer and may automatically select the
correct printer driver in the
Print Using
field. Or manually select the printer-maker
from the
Print Using
drop-down menu, and then select the printer model from the
scroll-down list, or select
Generic PostScrip Printer
option from the
Print Using
drop-down menu if the model is not listed. To implement the setting, click
Add
button.
The setup procedures for these three printing protocols (Internet Printing Protocol
(IPP), Line Printer Daemon (LPD), and HP Jet Direct – Socket) are basically the
same. Illustrated examples are include below for the sake of reference.
Page 129 / 150
125
For set up LPD Printing:
1.
Enter the IP address of the print server to which the printer is attached in
Address
field.
2.
Type the port name in
queue
field.
Click
Add
button after done the section of printer model in the
Print Using
drop-down menu.
Page 130 / 150
126
For set up IPP Printing:
1.
Enter the IP address of the print server to which the printer is attached in
Address
field. After that, type
“: 80”
or
“: second port”
if print server’s
second port is enabled.
2.
Type the port name in
queue
field.
Click
Add
button after done the section of printer model in the
Print Using
drop-down menu.
19216811.live