Page 46 / 76
Scroll up to view Page 41 - 45
46
Unix/Linux Printing
Please refer to the
PS Admin Manual
on the CD included with your purchase for
information on setting up the Print Server in Unix/Linux.
Page 47 / 76
47
Setting up Apple Talk or LPR
Printing
in Mac OS X
At the
Configure
pull-down menu,
select
Manually
Note: Mac OS printing is supported by Postscript printers only!
Open your
System
Preferences
window and Click
Network.
With Mac OSX you can use AppleTalk or LPR printers using IP protocols for printing
through Print Servers. Follow the instructions below for setting up the Print Server.
After attaching the Print Server to your network using the directions provided in the
Quick Installation Guide, change the IP Address of your Macintosh to access the
Print Server°s web configuration.
Page 48 / 76
48
The default IP
Address of the Print
Server is
192.168.0.10.
Manually change
your IP Address to
102.168.0.x, where
x is any number
between 1 and 254
(except 10 which is
the IP Address of
the Print Server.)
The IP Addresses
and Subnet Mask
shown here are
examples only.
Setting up Apple Talk or LPR Printing
in Mac OS X (continued)
Select the
AppleTalk
tab in this window
and check
Make
AppleTalk Active.
Page 49 / 76
49
Setting up Apple Talk or LPR Printing
in Mac OS X (continued)
Open your web
browser window and
type in the IP Address
of the DP-300U
(192.168.0.10). The
web configuration for
the DP-300U will
appear. Please write
down the printer
names that appear in
this window for future
use.
Select the
Network
tab in the configuration
window. Here you can
modify the IP Address
of the Print Server to
conform to your
network, if necessary.
If AppleTalk will be
used as the default
printing protocol, the
DP-300U°s IP Address
will not need to be
altered.
Page 50 / 76
50
Setting up Apple Talk or LPR Printing
in Mac OS X (continued)
To print, open a document
and select
File
>
Print
from the menu.
Select
Edit Printer
List
from the
Printer
dialog box.
Click
Add Printer
19216811.live