Page 26 / 88
Scroll up to view Page 21 - 25
22
D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
After login, you will be redirected to the NVR web UI:
Page 27 / 88
23
D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
The main categories for configuration are located on the menu tabs at the top of the page. These categories include:
LIVE VIDEO
- Shows the live video of network cameras and controls PTZ functions.
PLAYBACK
- Displays recorded video and exports snapshots or video.
SETUP
- Contains the DNS-722-4/DNS-726-4 setup wizard, as well as the LAN configuration settings,
camera search, camera settings, recording schedule, auto backup, event settings, time and system
settings, and device settings.
MAINTENANCE
- Contains the Administrator account configuration options, Hard Disk management
options and RAID configuration options. System configuration, backup, and restore functions are also
available.
STATUS
- Contains system, NVR, and event logs.
These pages and their configuration options will be discussed in detail in the following pages of this manual.
Web UI
Page 28 / 88
24
D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Wizard
The NVR has a setup Wizard that allows you to quickly configure some of the basic device settings.
When running the NVR setup wizard, the welcome
screen details the five steps of the wizard. Click
Next
to continue.
It is recommended you set an admin password
here. Enter the new password and re-enter it for
confirmation. Click
Next
to continue.
Setup
Page 29 / 88
25
D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Set the appropriate Time Zone and click
Next
to
continue.
It is recommended to assign your NVR a
Static IP
address. Enter an available IP address, the subnet
mask of your network, the Gateway IP address (usually
the IP adress of your router) and the IP address of
your DNS Server(s). Click
Next
to continue.
Note:
The IP address(es) of your NVR and camera(s)
must be in the same network.
Page 30 / 88
26
D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Enter a name for the NVR, or leave the default values
and click
Next
to continue.
When the wizard completes, click
Back
to go back
and make changes or click
Restart
to restart the NVR
and save the configuration.
While the NVR is restarting, a countdown screen will
appear.
19216811.live