41

D-Link DNS-343 User Manual

Section 3 - Configuration

After enabling the iTunes server on the DNS-343, launch iTunes. When iTunes detects the DNS-343, select it and you

will be prompted to enter the iTunes server password if required.

Select the DNS-343. When

prompted, enter in the iTunes

server password. Click

OK

.

Media stored on the DNS-343

will then be available for use in

iTunes.

4±

D-Link DNS-343 User Manual

Section 3 - Configuration

DHCP Server

DHCP Server

Starting IP

Address

Lease Time

The DNS-343 can be used as a DHCP Server.

As a DHCP server, it can be used to serve IP addresses to devices on

your local network. However, this feature should not be enabled if you already have a DHCP server, such as a router

on your local network.

Enables or Disables the DNS-343

DHCP Server.

Enter the starting IP address for the

range of addresses assigned by the

DHCP server.

Ending IP

Address

Enter the ending IP address for the

range of addresses assigned by the

DHCP server.

Sets the duration of time that an IP

address will remain assigned to a

device.

Click on the

Save Settings

button to

apply and save the new settings.

Save Settings

43

D-Link DNS-343 User Manual

Section 3 - Configuration

Change Admin Password

User Name

Password

New Password

Confirm

Password

Maintenance

The Admin menu allows you to set a password for your admin account.

It is recommended to set an admin password

when first configuring your DNS-343.

The administrator user name is

admin,

and this cannot be changed.

Enter the current password. (Leave

this blank if you have not set a

password yet.)

Enter a new password.

Enter the new password again for

confirmation.

Click

Save Settings

to save the new password.

44

D-Link DNS-343 User Manual

Section 3 - Configuration

System

Restart

Defaults

Configuration

Settings

Idle Time

The DNS-343 System menu provides options to perform a system restart, save and load configuration settings, and

set idle times.

Click

Restart

to reboot the DNS-343.

Click

Restore

to reset the DNS-343 to its factory default

settings. This will erase all previous configuration

changes.

Click

Shutdown

to turn off the DNS-343.

Click

Save

to save the current DNS-343 configuration

settings to a file on the local computer. If at a later time

you need to reload this configuration after a system

reset, browse to the file and click

Load

.

Enter the time (in minutes) that the administrator

will be allowed to remain idle while accessing the

DNS-343 configuration settings or that users will be

allowed to remain idle while accessing the download

schedule settings.

Click

Apply

to save the settings.

Shutdown

Apply

4²

D-Link DNS-343 User Manual

Section 3 - Configuration

Firmware

This section allows you to check for new firmware releases and upload them to your device.

To upgrade the DNS-343 firmware, go the D-Link Support

Page and download the latest version. When the download

is completed, use the

Browse

button to locate the firmware

file on your computer and click the

Apply

button to begin

loading the firmware to your device.