31

D-Link DNS-3±3 User Manual

Section 3 - Configuration

FTP Server Settings

Category

Max User

Determines whether the FTP

server rule will apply to a group or

individual user.

Group / User

Select the group or user the FTP

server rule will apply to.

Folder

Browse to and select the folder

or directory you are granting FTP

access to.

Select

root to

grant

access to all volumes.

Permission

Set the user or group permission to

Read Only or Read/Write.

Add

Click Add

to add the user or group

FTP rule.

Sets the maximum amount of

users that can connect to the FTP

server.

Idle Time

Sets the amount of time a user

can remain idle before being

disconnected.

Port

Sets the FTP port.

Default is 21.

Flow Control

Allows you to limit the amount of

bandwidth available for each user.

FTP Access

List

Lists all defined FTP Rules.

3±

D-Link DNS-3±3 User Manual

Section 3 - Configuration

If you are behind a router, you will need to forward the FTP port from the router to the DNS-323.

Additional filtering

and firewall settings may need to be modified on your router to allow FTP Access to the DNS-323 from the Internet.

Once the port has been forwarded on the router, users from the internet will access the FTP server through the WAN

IP address of the router.

If you are using a D-Link router, such as the WBR-2310 used in the example below, your port forwarding rule should

be similar to the following:

Name

Name the DNS-323 FTP server

rule.

IP Address

Enter the IP address of the

DNS-323.

Public Port

Enter the public FTP port.

By

default, the port is 21.

Private Port

Enter the private FTP port.

By

default, the port is 21.

Traffic Type

Set the traffic type to TCP.

If you use an FTP port other than 21, then users accessing the FTP server using an FTP client will have to

specify the non-standard port, and users who are using a browser will have to specify the port in the URL

(e.g. ftp://ftp.dns323.com:3000).

33

D-Link DNS-3±3 User Manual

Section 3 - Configuration

UPnP AV Server

UPnP AV

Server

Folder

Select Enable or Disable to enable

or disable the DNS-323 UPnP AV

server.

The DNS-323 features a UPnP AV Server.

This server provides the ability to stream photos, music and videos to UPnP

AV compatible network media players.

If the server is enabled, the DNS-323 will be automatically detected by UPnP

AV compatible media players on your local network.

Specifies the folder or directory

that will be shared by the UPnP

AV server.

Select root to share the

entire volume, or click Browse to

select a specific folder.

Refresh

Click

Refresh

after adding new files

to be used by UPnP AV compatible

devices.

3²

D-Link DNS-3±3 User Manual

Section 3 - Configuration

iTunes Server

iTunes Server

Folder

Password

The DNS-323 features an iTunes Server.

This server provides the ability to share music and videos to computers on

the local network running iTunes.

If the server is enabled, the DNS-323 will be automatically detected in the iTunes

program and the music and videos contained in the specified directory will be available to stream over the network.

Select Enable or Disable to enable

or disable the DNS-323 iTunes

server.

Specifies the folder or directory

that will be shared by the iTunes

server.

Select root to share the

entire volume, or click Browse to

select a specific folder.

Sets password for the iTunes

server.

Refresh

Click

Refresh

after adding new files

to be used with iTunes.

3³

D-Link DNS-3±3 User Manual

Section 3 - Configuration

After enabling the iTunes server on the DNS-323, launch iTunes. When iTunes detects the DNS-323, select it and you

will be prompted to enter the iTunes server password.

Select the DNS-323.

When

prompted, enter in the iTunes

server password. Click

OK

.

Media stored on the DNS-323

will then be available for use in

iTunes.