Page 21 / 159
Scroll up to view Page 16 - 20
17
D-Link DIR-895L User Manual
Section 3 - Getting Started
To use the mydlink service (mydlink.com or the mydlink Lite app), you
must have an account. Select
Yes
if you have a mydlink account already,
or
No
if you want to create one. Click
Next
to continue.
If you do not want to register at this time, click
Skip
.
If you clicked
Yes
, enter your mydlink account name (email address) and
password. Click
Next
to register your mydlink account with the router.
If you clicked
No
, fill out the requested information and click
Next
to
create your mydlink account.
At the end of the wizard, you will be presented with a final summary of
your settings. Click
Finish
to close the wizard.
Page 22 / 159
18
D-Link DIR-895L User Manual
Section 3 - Getting Started
The mydlink App will allow you to receive notices, browse network users,
and configure your router from an iPhone/iPad/iPod touch (iOS 6.0 or
higher), or Android device (2.3 or higher).
To download the "mydlink Lite" app, visit the Apple Store, Android Market
or
http://mydlink.com/Lite
.
PC and Mac users can use the mydlink portal at
http://mydlink.com
.
Page 23 / 159
19
D-Link DIR-895L User Manual
Section 3 - Getting Started
QRS Mobile App
QRS Mobile app allows you to install and configure your router from your mobile device.
Step 1
Search for the free
QRS Mobile
App on the iTunes Store or Google Play.
Step 2
Once your app is installed, you may now configure your router. Connect
to the router wirelessly by going to your wireless utility on your device.
Scan for the Wi-Fi name (SSID) as listed on the supplied info card. Select
and then enter your Wi-Fi password.
Step 3
Once you connect to the router, launch the QRS Mobile app from the Home
screen of your device.
Note:
The following steps show the Android interface of the QRS Mobile app. If
you are using an iPhone, iPad, or iPod touch, the appearance may be different
to that of the screenshots, but the process is the same.
Page 24 / 159
20
D-Link DIR-895L User Manual
Section 3 - Getting Started
Step 4
When the Welcome screen appears, tap
Start
to proceed, then enter your
device password and tap
Log In
. Tap
Next
once the Operation Mode
screen appears.
Step 5
At this point, please ensure that you the router is connected to a modem.
Plug one end of the provided Ethernet cable into your DSL or cable modem,
and plug the other end into the port marked INTERNET on the DIR-860L.
Tap
Next
to automatically detect your Internet connection and proceed
to the next step.
Page 25 / 159
21
D-Link DIR-895L User Manual
Section 3 - Getting Started
Step 6
Firstly, enter a network name (SSID) of your choice, or leave it unchanged
to accept the default SSID.
Secondly, choose a Wi-Fi password of at least 8 characters. Any device
trying to connect to the router wirelessly will need to enter this password
the first time it connects.
Tap
Next
to continue.
Step 7
Enter the administrator password of your choice. Unlike the Wi-Fi
password, this password is only required when you need to configure
the router. See
"Configuration" on page 63
for details of when this
password is used. Tap
Next
to continue.
19216811.live