Page 76 / 159
Scroll up to view Page 71 - 75
72
D-Link DIR-895L User Manual
Section 4 - Configuration
Enter the PPTP server IP address provided by your ISP.
Enter the username provided by your ISP.
Enter the password provided by your ISP.
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Select
Static IP
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Enter the IP address provided by your ISP (Static IP only).
Enter the subnet mask provided by your ISP (Static IP only).
Enter the gateway IP address provided by your ISP (Static IP only).
Enter the primary DNS server IP address assigned by your ISP.
PPTP Server IP
Address:
Username:
Password:
Reconnect
Mode:
Maximum Idle
Time:
Address Mode:
PPTP IP
Address:
PPTP Subnet
Mask:
PPTP Gateway
IP Address:
Primary DNS
Server:
Choose
PPTP
(Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a
username and password.
PPTP
DIR-895L HW:A1 FW:1.00
Page 77 / 159
73
D-Link DIR-895L User Manual
Section 4 - Configuration
Enter the secondary DNS server IP address assigned by your ISP.
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Click
Save
when you are done.
Secondary DNS
Server:
MTU:
DIR-895L HW:A1 FW:1.00
Page 78 / 159
74
D-Link DIR-895L User Manual
Section 4 - Configuration
L2TP
Enter the L2TP server IP address provided by your ISP.
Enter the username provided by your ISP.
Enter the password provided by your ISP.
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Select
Static IP
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Enter the IP address provided by your ISP (Static IP only).
Enter the subnet mask provided by your ISP (Static IP only).
Enter the gateway IP address provided by your ISP (Static IP only).
Enter the primary DNS server IP address assigned by your ISP.
L2TP Server IP
Address:
Username:
Password:
Reconnect
Mode:
Maximum Idle
Time:
Address Mode:
L2TP IP
Address:
L2TP Subnet
Mask:
L2TP Gateway
IP Address:
Primary DNS
Server:
Choose
L2TP
(Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username and
password.
DIR-895L HW:A1 FW:1.00
Page 79 / 159
75
D-Link DIR-895L User Manual
Section 4 - Configuration
Enter the secondary DNS server IP address assigned by your ISP.
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Click
Save
when you are done.
Secondary DNS
Server:
MTU:
DIR-895L HW:A1 FW:1.00
Page 80 / 159
76
D-Link DIR-895L User Manual
Section 4 - Configuration
DS-Lite
Select
DS-Lite DHCPv6
to let the router allocate the AFTR IPv6
address automatically. Select
Manual Configuration
to enter the
AFTR IPv6 address manually.
If you selected Manual Configuration above, enter the AFTR IPv6
address used here.
Enter the B4 IPv4 address value used here.
Once connected, the WAN IPv6 address will be displayed here.
Once connected, the IPv6 WAN default gateway address will be
displayed here.
Click
Save
when you are done.
DS-Lite
Configuration:
AFTR IPv6
Address:
B4 IPv6
Address:
WAN IPv6
Address:
IPv6 WAN
Default
Gateway:
DS-Lite
is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for configuration:
DIR-895L HW:A1 FW:1.00
19216811.live