1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-890L
    5. /
  5. 17
Page 81 / 181 Scroll up to view Page 76 - 80
76
D-Link DIR-890L User Manual
Section 3 - Configuration
System
Click
Save
to save the current router configuration settings to a file on
your computer's hard drive.
Click
Select File
to locate and load previously saved router configuration
file. This will overwrite the router’s current configuration.
This option will restore all configuration settings back to the settings
that were in effect at the time the router was shipped from the factory.
Any settings that have not been saved will be lost, including any rules
that you have created. If you want to first save the current router
configuration settings to your computer, use the
Save
button above.
Click
Reboot
to reboot the router.
Save Settings
To Local Hard
Drive:
Load Settings
From Local
Hard Drive:
Restore To
Factory Default
Settings:
Reboot The
Device:
This page allows you to save the DIR-890L’s current configuration, load a previously saved configuration, and reset the router to the factory default settings.
From the
Admin
page click
System
.
Page 82 / 181
77
D-Link DIR-890L User Manual
Section 3 - Configuration
Firmware Upgrade
This page will allow you to upgrade the router’s firmware, either automatically or manually. To manually upgrade the firmware, you must first
download the file from
.
From the
Management
menu, click
Upgrade
.
Displays the
Current Firmware Version
and
Current Firmware Date
.
Click
Check for New Firmware
to prompt the router to check for a new
firmware version. If a newer version is found, you will be prompted to
install it*.
If you prefer to upgrade manually, first download the firmware file to
your computer that you wish to upgrade to. Next, click the
Select File
button and browse to locate the file and install the new firmware.
Firmware
Information:
Check for New
Firmware:
Upgrade
Firmware:
*Note:
When you click
Check for New Firmware
you will see a message
that says, "Checking". If what you have currently installed is the latest version,
you will see a message that says, "This firmware is the latest version".
Page 83 / 181
78
D-Link DIR-890L User Manual
Section 3 - Configuration
Statistics
You can view the
Internet
,
LAN
,
Wi-Fi 2.4GHz
, or
Wi-Fi 5GHz
statistics by clicking
on the respective tabs at the top. The graph will update in real time. To clear the
information on the graph, click
Clear
.
The traffic counter will reset if the device is rebooted.
On the Statistics page you can view the number of packets that pass through the router on the WAN, LAN, and wireless segments.
From the
Management
menu, click
Statistics
.
Page 84 / 181
79
D-Link DIR-890L User Manual
Section 4 - SharePort
The mydlink SharePort app is a mobile application that allows you to conveniently stream media and share files stored on a
USB drive connected to your DIR-890L. Once the router is set up, you can start the app and easily connect from a local network
or through the Internet to access your photos, videos, music, and documents. The SharePort app allows you to create your
own personal cloud storage. You can upload files and photos from your mobile device to the removable storage via the app
from anywhere in the world!
Note:
In order to ensure smooth streaming performance, you will need a minimum of 2 Mbit/s upload bandwidth for your router’s Internet connection.
Streaming performance will vary depending on the quality of your Internet connection.
1. If you are connecting remotely through the mydlink SharePort app from the Internet, you will need a
mydlink
account. (For
more information, go to
www.mydlink.com
.)
2. Make sure the device is powered on. Then plug your USB drive into
the USB port on the back of the router.
Note:
If you connect a USB drive containing many files or with a large capacity, it may
take a while for the router to scan and catalog your files.
Using the mydlink SharePort™ App
USB drive
The mydlink SharePort™ App iOS Devices
The instructions that follow are for the mydlink SharePort app for iPad®, iPhone®, and iPod Touch®. Users of other types of
devices may skip to
"Using the mydlink SharePort™ app for Android™" on page 97
, or go to
"Using SharePort Mobile for
Windows® 8/RT" on page 116
.
Page 85 / 181
80
D-Link DIR-890L User Manual
Section 4 - SharePort
4. On your mobile device, go to your Wi-Fi settings and connect to your
router’s wireless network using the default Wi-Fi settings. By default,
your
Network Name
and
Password
are:
• Wi-Fi Network Name (SSID):
dlink-XXXX*
• Password: (leave this blank)
*
Note:
For the 2.4GHz band, the SSID is dlink-XXXX, with XXXX representing
the last four digits of your router’s MAC address. For the 5GHz band, the SSID
is dlink-XXXX-5GHz.
3. Use your iPhone, iPad or iPod Touch to search for and download the
free
mydlink SharePort™
app from the App Store.
If you have a QR code reader, you can scan the code to the right for
mydlink SharePort
.
Note:
For remote access, you will need the
mydlink SharePort
app
.
The
SharePort
Mobile
app is for local access only.

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top