Page 81 / 157
Scroll up to view Page 76 - 80
77
D-Link DIR-880L User Manual
Section 4 - Configuration
Auto Detection
Select either
Obtain DNS server address automatically
or
Use the
following DNS address
.
If you selected
Use the following DNS address
above, enter the
primary DNS server address.
If you selected
Use the following DNS address
above, enter the
secondary DNS server address.
Enable or disable prefix delegation services.
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
router.
Displays the router’s LAN link-local address.
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable or disable automatic DHCP-PD services.
DNS Type:
Primary DNS
Server:
Secondary DNS
Server:
Enable DHCP-
PD:
LAN IPv6
Address:
LAN IPv6 Link-
Local Address:
Enable
Automatic
IPv6 Address
Assignment:
Enable
Automatic
DHCP-PD in
LAN:
This is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISPs require you
to make some settings on your side before your router can connect to the IPv6 Internet.
Page 82 / 157
78
D-Link DIR-880L User Manual
Section 4 - Configuration
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC + Stateless
DHCPv6
.
Enter the IPv6 address lifetime (in minutes).
Click
Save
when you are done.
Auto
Configuration
Type:
Router
Advertisement
Lifetime:
Page 83 / 157
79
D-Link DIR-880L User Manual
Section 4 - Configuration
Static IPv6
Enable or disable a link-local address.
If you disabled
Use Link-Local Address
, enter the address supplied
by your ISP.
If you disabled
Use Link-Local Address
, enter the subnet prefix
length supplied by your ISP.
Enter the default gateway for your IPv6 connection.
Enter the primary DNS server address.
Enter the secondary DNS server address.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN link-local address.
Check to enable the Automatic IPv6 Address Assignment feature.
Use Link-Local
Address:
IPv6 Address:
Subnet Prefix
Length:
Default
Gateway:
Primary DNS
Server:
Secondary DNS
Server:
LAN IPv6
Address:
LAN IPv6 Link-
Local Address:
Enable
Automatic
IPv6 Address
Assignment:
Select
Static IP
if your IPv6 information is provided by your Internet service provider (ISP).
Page 84 / 157
80
D-Link DIR-880L User Manual
Section 4 - Configuration
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC + Stateless
DHCPv6
.
Enter the IPv6 address lifetime (in minutes).
Click
Save
when you are done.
Auto
Configuration
Type:
Router
Advertisement
Lifetime:
Page 85 / 157
81
D-Link DIR-880L User Manual
Section 4 - Configuration
Auto Configuration (SLAAC/DHCPv6)
Select either
Obtain DNS server address automatically
or
Use the
following DNS address
.
If you selected
Use the following DNS address
above, enter the
primary DNS server address.
If you selected
Use the following DNS address
above, enter the
secondary DNS server address.
Enable or disable prefix delegation services.
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
router.
Displays the router’s LAN link-local address.
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable or disable automatic DHCP-PD services.
DNS Type:
Primary DNS
Server:
Secondary DNS
Server:
Enable DHCP-
PD:
LAN IPv6
Address:
LAN IPv6 Link-
Local Address:
Enable
Automatic
IPv6 Address
Assignment:
Enable
Automatic
DHCP-PD in
LAN:
This is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISPs require you
to make some settings on your side before your router can connect to the IPv6 Internet.
19216811.live