1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-868L TeamF1
    5. /
  5. 17
Page 81 / 173 Scroll up to view Page 76 - 80
76
D-Link DIR-868L User Manual
Section 3 - Configuration
This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.
Enter a name for the rule or select an application from
the drop-down menu. Select an application and click
<<
to populate the fields.
Enter the IP address of the computer on your local
network that you want to allow the incoming
service to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the “Computer Name” drop-down
menu. Select your computer and click
<<
.
Enter the port that you want to open next to Private
Port and Public Port. The private and public ports are
usually the same. The public port is the port seen from
the Internet side, and the private port is the port being
used by the application on the computer within your
local network.
Select
TCP
,
UDP
, or
Both
from the drop-down menu.
The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always be
enabled. You can create your own times in the
Tools
>
Schedules
section.
Select
Allow All
(most common) or a created Inbound
filter. You may create your own inbound filters in the
Advanced > Inbound Filter
page.
Name:
IP Address:
Private Port/
Public Port:
Protocol Type:
Schedule:
Inbound Filter:
Virtual Server
Advanced
Page 82 / 173
77
D-Link DIR-868L User Manual
Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Port Forwarding
Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click
<<
to populate the fields.
Enter the IP address of the computer on your local
network that you want to allow the incoming service
to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the “Computer Name” drop-down
menu. Select your computer and click
<<
.
Enter the TCP and/or UDP port or ports that you
want to open. You can enter a single port or a range
of ports. Separate ports with a comma.
Example: 24,1009,3000-4000
The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to
Always
,
which will allow the particular service to always be
enabled. You can create your own times in the
Tools
>
Schedules
section.
Select
Allow All
(most common) or a created
Inbound filter. You may create your own inbound
filters in the
Advanced > Inbound Filter
page.
Name:
IP Address:
TCP/UDP:
Schedule:
Inbound Filter:
Page 83 / 173
78
D-Link DIR-868L User Manual
Section 3 - Configuration
Enter a name for the rule. You may select a
pre-defined application from the drop-down menu
and click
<<
.
This is the port used to trigger the application. It
can be either a single port or a range of ports.
Select the protocol of the trigger port (TCP, UDP,
or Both).
This is the port number on the Internet side that
will be used to access the application. You may
define a single port or a range of ports. You can use
a comma to add multiple ports or port ranges.
Select the protocol of the firewall port (TCP, UDP,
or Both).
The schedule of time when the Application Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always
be enabled. You can create your own times in the
Tools
>
Schedules
section.
Name:
Trigger:
Traffic Type:
Firewall:
Traffic Type:
Schedule:
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of
these applications work with the DIR-868L. If you need to run applications that require multiple connections, specify the port
normally associated with an application in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter the firewall
(public) ports associated with the trigger port to open them for inbound traffic.
The DIR-868L provides some predefined applications in the table on the bottom of the web page. Select the application you
want to use and enable it.
Page 84 / 173
79
D-Link DIR-868L User Manual
Section 3 - Configuration
QoS Engine
This option is disabled by default. Enable this option for better
performance and experience with online games and other
interactive applications, such as VoIP.
The speed at which data can be transferred from the router to
your ISP. This is determined by your ISP.
The speed at which data can be transferred from the Internet to
your router. This is determined by your ISP.
Select either
Strict Priority Queue
(rank in order) or
Weighted
Fair Queue
(percentage).
The queue ID used will be displayed in the first column.
When
Strict Priority Queue
is selected, the
Queue Priority
will be
displayed in the second column.
When the
Weighted Fair Queue
option is selected, you will be able
to manually enter the
Queue Weight
for each individual Queue
ID in the second column.
Enable QoS:
Uplink Speed:
Downlink Speed:
Queue Type:
Queue ID:
Queue Priority:
Queue Weight:
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are disabled
and application priority is not automatically classified. The QoS section contains a queuing mechanism, traffic shaping and classification. It supports
two kinds of queuing mechanisms. Strict Priority Queue (SPQ) and Weighted Fair Queue (WFQ). SPQ will process traffic based on traffic priority.
Queue1 has the highest priority and Queue4 has the lowest priority. WFQ will process traffic based on the queue weight. Users can configure each
queue’s weight. The sum of all the queue’s weight must be 100. When surfing the Internet, the system will do traffic shaping based on the uplink
and downlink speed. The classification rules can be used to classify traffic to different queues, then SPQ or WFQ will do QoS based on the queue’s
priority or weight.
Page 85 / 173
80
D-Link DIR-868L User Manual
Section 3 - Configuration
The QoS Engine supports overlaps between rules, where more than one rule can match for a specific message flow. If more than one
rule is found to match the rule with the highest priority will be used.
Create a name for the rule that is meaningful to you.
The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority
(least urgent).
The protocol used by the messages.
The rule applies to a flow of messages whose LAN-side IP address falls within the range set here.
The rule applies to a flow of messages whose WAN-side IP address falls within the range set here.
Select a service or port you want to assign to this rule.
Classification
Rules:
Name:
Queue ID:
Protocol:
Local IP Range:
Remote IP
Range:
Application Port:
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that
require the use of traffic control and data priority manipulation.
Click on the
Save Settings
button to accept the changes made or click on the
Don’t Save Settings
button to discard the
changes made.

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top