Page 86 / 173
Scroll up to view Page 81 - 85
81
D-Link DIR-868L User Manual
Section 3 - Configuration
Network Filters
Select
Turn MAC Filtering Off
,
Allow MAC addresses
listed below
, or
Deny MAC addresses listed below
from the drop-down menu.
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer
to the
Networking Basics
section in this manual.
Select a DHCP client from the drop-down menu and
click
<<
to copy that MAC Address.
Select a pre-defined or user created schedule from
the drop-down menu, or click
New Schedule
to
create a new schedule. You set a specific time frame
for the MAC filter rule to be active.
Configure MAC
Filtering:
MAC Address:
DHCP Client List:
Schedule:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Page 87 / 173
82
D-Link DIR-868L User Manual
Section 3 - Configuration
Access Control
Check the
Enable Access Control
box, and then
click on
Add Policy
to start the Wizard.
Enable Access
Control:
The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to
only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P
utilities or games.
Click
Next
to continue with the wizard.
Access Control Wizard
Page 88 / 173
83
D-Link DIR-868L User Manual
Section 3 - Configuration
Enter a name for the policy and then click
Next
to continue.
Select a schedule (i.e., Always) from the drop-down menu and
then click
Next
to continue.
Enter the following information and then click
Next
to continue.
•
Address Type
- Select
IP
,
MAC
, or
Other Machines
.
•
IP Address
- Enter the IP address of the computer you
want to apply the rule to.
•
Machine Address
- Enter the PC MAC address or click
on
Clone Your PC’s MAC Address
.
Click
Add
to continue.
Select the filtering method.
If you choose to
Block Some Access
, check
Apply Web Filter
and/or
Apply Advanced Port Filters
.
Click
Next
to continue.
Page 89 / 173
84
D-Link DIR-868L User Manual
Section 3 - Configuration
Add Port Filter Rules
:
Enable
- Check to enable the rule.
Name
- Enter a name for your rule.
Dest IP Start
- Enter the starting IP address.
Dest IP End
- Enter the ending IP address.
Protocol
- Select the protocol.
Dest Port Start
- Enter the starting port number.
Dest Port End
- Enter the ending port number.
Click
Next.
To enable
Web Access Logging
, click
Enabled
.
Click
Save
to save the access control rule.
Your newly created policy will now show up under
Policy Table.
Page 90 / 173
85
D-Link DIR-868L User Manual
Section 3 - Configuration
Configure
Website Filter:
Website URL/
Domain:
Website Filters
Select either
DENY computers access to
ONLY these sites
or
ALLOW computers
access to ONLY these sites
.
Enter the keywords or URLs that you want
to allow or block. Click
Save Settings
.
Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network.
To use this feature select to
Allow
or
Deny
, enter the domain or website and click
Save Settings
. You must also select
Apply
Web Filter
under the
Access Control
section (pages 82 - 83).
19216811.live