Page 166 / 215
Scroll up to view Page 161 - 165
161
D-Link DIR-866L User Manual
Section 4 - SharePort
Videos
You can go to the Videos section to browse and play the video files on your storage. Click
Back
to return to the main menu.
•
Click on the video filename to open the file in a window
for streaming.
You can pause, seek, mute, adjust the volume, and activate full screen
mode in the control window.
•
Close the control window to end playback.
Note:
Depending on your browser, the video file may be played back using the default
player associated with that file format.
Page 167 / 215
162
D-Link DIR-866L User Manual
Section 4 - SharePort
Documents
You can go to the Documents section to open and save files from your storage to your computer. Click
Back
to return to the
main menu.
•
Click on the filename to open the file.
•
Depending on the file type you select, the default
program may open. Or you could see a dialog box
asking you to select the option to
Open
or
Save
the file.
Page 168 / 215
163
D-Link DIR-866L User Manual
Section 5 - Connect a Wireless Client
Connect a Wireless Client to your Router
WPS Button
Step 2
- Within two minutes, press the WPS button on your
wireless client (or launch the software utility and start
the WPS process).
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-866L router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1
- Press the WPS button on the back of the DIR-866L for
a minimum of one second. The Power LED on the front
will start to blink.
Step 3
- Allow up to one minute to configure. Once the Power LED stops blinking, you should be connected and your wireless
connection will be secure with WPA2.
WPS Button
Page 169 / 215
164
D-Link DIR-866L User Manual
Section 5 - Connect a Wireless Client
Windows® 8
1. Click on the wireless computer icon in your system tray (lower-right
corner next to the time).
2. A list of available wireless networks will appear.
3. Click the wireless network (SSID) you want to connect to and then
click
Connect
.
4. If the network is secure/encrypted, enter the Wi-Fi password
(security key) and click
Next
.
Page 170 / 215
165
D-Link DIR-866L User Manual
Section 5 - Connect a Wireless Client
If you get a good signal but cannot access the Internet, confirm the encryption by reviewing the profile or check the TCP/IP
settings for your wireless adapter. Refer to the
Networking Basics
section in this manual for more information.
5. Click either to enable or disable file sharing.
6. You will now be connected to your wireless network.
19216811.live