Page 21 / 151
Scroll up to view Page 16 - 20
17
D-Link DIR-862L User Manual
Section 3 - Configuration
To use the mydlink service (mydlink.com or the mydlink Lite app), you
must have an account. Select if you do have a mydlink account or if you
need to create one. Click
Next
to continue.
If you do not want to register at this time, click
Cancel
.
If you clicked
Yes
, enter your mydlink account name (email address) and
password. Click
Login
to register your router.
If you clicked
No
, fill out the requested information and click
Sign Up
to create your mydlink account.
Page 22 / 151
18
D-Link DIR-862L User Manual
Section 3 - Configuration
The mydlink App will allow you to receive notices, browse network
users, and configure your router from an iPhone/iPad/iPod Touch
(iOS 3.0 or higher), Android device (1.6 or higher).
To download the "mydlink lite" app, visit the Apple Store, Android
Market or
http://mydlink.com/Lite
.
PC and Mac users can use the mydlink portal at
http://mydlink.com
.
Page 23 / 151
19
D-Link DIR-862L User Manual
Section 3 - Configuration
QRS Mobile App
D-Link offers an app for your iOS/Android device to install and configure your router.
Step 1
From your iPad, Touch, or iPhone, go to the iTunes Store and
search for ‘D-Link’. Select
QRS Mobile
and then download it.
You may also scan this code to download.
Step 2
Once your app is installed, you may now configure your router.
Connect to the router wirelessly by going to your wireless utility
on your device. Scan for the Wi-Fi name (SSID) as listed on the
supplied info card. Select and then enter your Wi-Fi password.
Step 3
Once you connect to the router, launch the QRS mobile app and
it will guide you through the installation of your router.
Page 24 / 151
20
D-Link DIR-862L User Manual
Section 3 - Configuration
1. Insert your USB flash drive into DIR-862L.
2. Scan the QR code to download the
SharePort Mobile
app to
your iOS or Android device.
SharePort Mobile App
3. From your iOS mobile device, click
Settings.
The SharePort Mobile app will allow you to access files from a USB thumb drive that is plugged into your router. You must
enable file sharing from the
Setup
>
Storage
page (refer to page 68) for this app to work properly.
Settings
Page 25 / 151
21
D-Link DIR-862L User Manual
Section 3 - Configuration
4. Click
Wi-Fi,
select the Wi-Fi Network Name (SSID) that you
created in the setup and then enter your Wi-Fi password.
5. Once connected, click on the
SharePort Mobile
icon.
6. The following screen will appear.
7. Click on
Settings
icon located on the right top corner of the
screen. Click
Edit
to enter your User Name and Password.
Once you finish, click
Done
to continue.
19216811.live