D-Link DIR-860L Router Manual PDF (Setup & Configuration Guide)

Page 101 / 173 Scroll up to view Page 96 - 100

96

D-Link DIR-860L User Manual

Section 3 - Conﬁguration

IPv6 Routing

Check the box next to the route you wish to enable.

Enter a speciﬁc name to identify this route.

This is the IP address of the router used to reach the

speciﬁed destination or enter the IPv6 address preﬁx

length of the packets that will take this route.

Enter the metric value for this rule here.

Use the drop-down menu to specify if the IP packet

must use the WAN or LAN interface to transit out of

the Router.

Enter the next hop that will be taken if this route is used.

Route List:

Name:

Destination IP/

Preﬁx Length:

Metric:

Interface:

Gateway:

This page allows you to specify custom routes that determine how data is moved around your network.

Page 102 / 173

97

D-Link DIR-860L User Manual

Section 3 - Conﬁguration

Admin

This page will allow you to change the Administrator password and also enable Remote Management.

Tools

Enter a new password for the Admin login name. Enter again to verify password.

Enter a name for your router.

Enables a challenge-response test to require users to type letters or numbers

from a distorted image displayed on the screen to prevent online hackers and

unauthorized users from gaining access to your router’s network settings.

Check to enable HTTPS to connect to the router securely. This means to connect

to the router, you must enter

https

://192.168.0.1

(for example) instead of

http

://192.168.0.1

.

Remote management allows the DIR-860L to be conﬁgured from the Internet

by a web browser. A username/password is still required to access the Web

Management interface.

The port number used to access the DIR-860L is used in the URL. Example:

http://x.x.x.x:8080

whereas x.x.x.x is the Internet IP address of the DIR-860L

and 8080 is the port used for the Web Management interface.

If you have enabled

HTTPS Server,

you must enter

https://

as part of the URL

to access the router remotely.

This section will list any rules that are created. You may click the

Edit

icon to

change the settings or enable/disable the rule, or click the

Delete

icon to

remove the rule.

Details

will display the current remote admin ﬁlter.

Admin Password:

Gateway Name:

Enable Graphical

Authentication:

Enable HTTPS

Server:

Enable Remote

Management:

Remote Admin Port:

Remote Admin

Inbound Filter:

Page 103 / 173

98

D-Link DIR-860L User Manual

Section 3 - Conﬁguration

Time

Displays the current date and time of the router.

Select your Time Zone from the drop-down menu.

Check to enable manual entry of daylight saving

time.

When daylight saving manual entry is enabled, the

oﬀset value is one hour by default.

Enter a start date, an end date, including day of the

week, and time for daylight saving time.

This option is strongly recommended. Check the

box to have the router connect to an NTP server on

the Internet (not a local server).

Select an NTP server from the drop-down box and

click

Update Now

.

To manually input the time, enter the values in these

ﬁelds for the

Year, Month, Day, Hour, Minute,

and

Second

and then click

Save Settings

.

You can also click

Sync. Your Computer’s Time

Settings

to synch the date and time with the

computer you are currently on.

Time:

Time Zone:

Enable Daylight

Saving:

Daylight Saving

Oﬀset:

Daylight Saving

Dates:

Automatically

Synchronize with

D-Link’s Internet

Time Server:

NTP Server Used:

Set the Time and

Date Manually:

The Time Conﬁguration option allows you to conﬁgure, update, and maintain the correct time on the internal system clock.

From this section you can set the time zone that you are in and set the Time Server. You have the option of using

NTP,

which

is short for Network Time Protocol. An NTP server will sync the time and date with your router. Daylight Saving can also be

conﬁgured to automatically adjust the time when needed.

Page 104 / 173

99

D-Link DIR-860L User Manual

Section 3 - Conﬁguration

SysLog

The DIR-860L keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server

on your network.

Enable Logging to

SysLog Server:

SysLog Server IP

Address:

Check this box to send the router logs to a SysLog

Server.

The address of the SysLog server that will be

used to send the logs. You may also select your

computer from the drop-down menu (only if

receiving an IP address from the router via DHCP).

Page 105 / 173

100

D-Link DIR-860L User Manual

Section 3 - Conﬁguration

Email Settings

The Email feature can be used to send the system log ﬁles, router alert messages, and ﬁrmware update notiﬁcation to your

email address.

Enable Email

Notiﬁcation:

From Email Address:

To Email Address:

Email Subject:

SMTP Server Address:

SMTP Server Port:

Enable Authentication:

Account Name:

Password:

On Log Full:

On Schedule:

Schedule:

Detail:

When this option is enabled, router activity logs are emailed to a

designated email address.

This email address will appear as the sender when you receive a log

ﬁle or ﬁrmware upgrade notiﬁcation via email.

Enter the email address where you want the email sent.

Add a subject line to your email.

Enter the SMTP server address for sending email.

Enter the SMTP port used on the server.

Check this box if your SMTP server requires authentication.

Enter your account for sending email.

Enter the password associated with the account. Re-type the

password associated with the account.

When this option is selected, logs will be sent via email to your

account when the log is full.

Selecting this option will send the logs via email according to

schedule.

This option is enabled when

On Schedule

is selected. You can select

a schedule from the list of deﬁned schedules. To create a schedule,

go to

Tools > Schedules

.

Detail will display selected schedule.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share