Page 71 / 173
Scroll up to view Page 66 - 70
66
D-Link DIR-860L User Manual
Section 3 - Configuration
IPv6 Manual Setup
There are several connection types to choose from:
Auto Detection, Static IPv6, Autoconfiguration (SLAAC/DHCPv6),
PPPoE
,
IPv6 in IPv4 Tunnel, 6to4, 6rd,
and
Local Connectivity Only
. If you are unsure of your connection method, please
contact your IPv6 Internet Service Provider.
Note:
If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or
disabled.
Auto Detection
Select
Auto Detection
to have the router detect and automatically
configure your IPv6 setting from your ISP.
Click
Save Settings
.
Page 72 / 173
67
D-Link DIR-860L User Manual
Section 3 - Configuration
Static IPv6
Select
Static IPv6
from the drop-down menu.
Enter the address settings supplied by your Internet provider
(ISP).
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC +
Stateless DHCPv6
.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the Router Advertisement Lifetime (in minutes).
Click
Save Settings
.
My IPv6 Connection is:
WAN IPv6 Address
Settings:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable Automatic IPv6
address assignment:
Autoconfiguration Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
Router Advertisement
Lifetime:
Page 73 / 173
68
D-Link DIR-860L User Manual
Section 3 - Configuration
Autoconfiguration
Select
Autoconfiguration (Stateless/DHCPv6)
from the
drop-down menu.
Select either
Obtain DNS server address automatically
or
Use the following DNS Address
.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC +
Stateless DHCPv6
.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the Router Advertisement Lifetime (in minutes).
Click
Save Settings
.
My IPv6 Connection is:
IPv6 DNS Settings:
Primary/Secondary DNS
Server:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable Automatic IPv6
address assignment:
Autoconfiguration Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
Router Advertisement
Lifetime:
Page 74 / 173
69
D-Link DIR-860L User Manual
Section 3 - Configuration
PPPoE
Select
PPPoE
from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet
provider (ISP).
Select
Create a new session
if you have IPv6.
Select
Static IP
if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Enter the IP address (Static PPPoE only).
Enter your PPPoE username.
Enter your PPPoE password and then retype the password in the
next box.
Enter the ISP Service Name (optional).
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1492 is the default MTU.
Select either
Obtain IPv6 DNS servers automatically
or
Use the
following IPv6 DNS Servers
Enter the primary and secondary DNS server addresses.
My IPv6 Connection is:
PPPoE Internet Connection
Type:
PPPoE Session:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnect Mode:
Maximum Idle Time:
MTU:
IPv6 DNS Settings:
Primary/Secondary DNS
Servers:
Page 75 / 173
70
D-Link DIR-860L User Manual
Section 3 - Configuration
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable Automatic IPv6
address assignment:
Enable Automatic DHCP-
PD in LAN:
Autoconfiguration Type:
IPv6 Address Range Start:
IPv6 Address Range End:
Router Advertisement
Lifetime:
Check to enable DHCP-PD.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the IPv6 Autoconfiguration.
Check to enable delegation of previxes for router addresses.
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC +
Stateless DHCPv6
.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the Router Advertisement Lifetime (in minutes).
Click
Save Settings
.
19216811.live