Page 21 / 120
Scroll up to view Page 16 - 20
17
D-Link DIR-859 User Manual
Section 3 - Configuration
QRS Mobile App
The QRS Mobile app allows you to install and configure your router from your mobile device.
Wi-Fi Name(SSID) 2.4Ghz:
dlink-xxxx
Wi-Fi Name(SSID) 5GHz:
dlink-xxxx-5GHz
Password: xxxxxxxx
To configure your router, go to:
Username: “Admin”
Password:” “ (leave the field blank)
Step 1
Search for the free
QRS Mobile
app on the App Store or Google Play.
Step 2
Once the app is installed on your mobile device, you may configure your
router. Connect to the router wirelessly by going to your wireless utility
on your device. Scan for the
Wi-Fi Name
(SSID) as listed on the supplied
Wi-Fi Configuration card. Select the network and then enter your Wi-Fi
password.
Step 3
Once you connect to the router, tap on the
QRS Mobile
icon to launch
the QRS mobile app from your mobile device.
For the App Store, you may also
scan this code to download.
For Google Play, you may also
scan this code to download.
Page 22 / 120
18
D-Link DIR-859 User Manual
Section 3 - Configuration
Step 4
You will see the
Welcome
screen. Tap
Start
to proceed. When the
Operation
Mode
screen appears, tap
Next
.
Step 5
At this point, make sure that your router is connected to a modem. Plug
one end of the provided Ethernet cable into your DSL or cable modem,
and plug the other end into the port marked INTERNET on the DIR-859.
Tap
Next
to automatically detect your Internet connection and proceed
to the next step.
Page 23 / 120
19
D-Link DIR-859 User Manual
Section 3 - Configuration
Step 6
You will be prompted to set up each wireless frequency band; the 2.4GHz
band followed by the 5GHz band.
A. Enter a
Network Name
(SSID) of your choice, or you may leave it
unchanged to accept the default SSID. Each wireless band can be
assigned its own SSID.
B. Choose a
Wi-Fi Password
of at least eight characters. You will need
to enter this
Password
the first time you connect any device to the
router wirelessly.
Tap
Next
to proceed.
Step 7
Enter the
Device Password
(Admin Password
) of your choice. Unlike
the Wi-Fi password, this password is only required when you need to
configure the router. Refer to
"Web-based Configuration Utility" on page
21
to learn how this password is used. Tap
Next
to proceed.
Page 24 / 120
20
D-Link DIR-859 User Manual
Section 3 - Configuration
Step 8
If you would like to receive notification whenever a new firmware update
is available, tap the
Notify me when new firmware is available
check
box and tap
Next
.
Otherwise, just tap
Next
to proceed.
Step 9
You will see a summary of your settings. If you need to make any changes,
tap
Back
to step back through the previous pages.
Otherwise, tap
Next
to complete the setup.
Congratulations, your device has been successfully configured! You may now exit the QRS Mobile app.
Page 25 / 120
21
D-Link DIR-859 User Manual
Section 3 - Configuration
Web-based Configuration Utility
Enter your password. If you did not create a password with the
Setup Wizard
, leave
the
Admin Password
field blank by default. Click
Log In
to proceed.
Note:
If you cannot remember your password and cannot log in, press the reset button
(see page 4) to restore the router to its factory default settings.
Open a web-browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and enter
or the IP address of the router
.
The router’s
Home
page will open, displaying its current connection status.
The bar at the top of the page has quick access to
Settings, Advanced,
and
Management
functions. You may easily navigate back
Home
at any time.
Note:
The system will automatically time-out after a period of inactivity. (You will have
to log back in as described above.)
19216811.live