Page 46 / 120
Scroll up to view Page 41 - 45
42
D-Link DIR-859 User Manual
Section 3 - Configuration
Enable or disable the
Automatic IPv6 Address Assignment
feature.
Enable or disable
Automatic DHCP-PD in LAN
services.
Select
SLAAC + RDNSS
,
SLAAC + Stateless DHCP
, or
Stateful
DHCPv6
.
Enter the IPv6 address lifetime (in minutes).
Click
Save
when you are done.
Enable Automatic
IPv6 Address
Assignment:
Enable Automatic
DHCP-PD in LAN:
Autoconfiguration
Type:
Router
Advertisement
Lifetime:
Page 47 / 120
43
D-Link DIR-859 User Manual
Section 3 - Configuration
6 to 4
Displays the
6to4 Address
.
Enter the
6to4 Relay
supplied by your ISP.
Enter the
Primary DNS Server
address.
Enter the
Secondary DNS Server
address.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s
LAN IPv6 Link-Local Address
.
Click to enable the
Automatic IPv6 Address Assignment
feature.
Select
SLAAC + RDNSS
or
SLAAC + Stateless DHCP
, or
Stateful
DHCPv6
.
Enter the IPv6 address lifetime (in minutes).
Click
Save
when you are done.
6to4 Address:
6to4 Relay:
Primary DNS
Server:
Secondary DNS
Server:
LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enable Automatic
IPv6 Address
Assignment:
Autoconfiguration
Type:
Router
Advertisement
Lifetime:
In this section, the user can configure the IPv6 6 to 4 connection settings. 6 to 4 is an IPv6 address assignment and automatic tunneling technology
that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet.
Page 48 / 120
44
D-Link DIR-859 User Manual
Section 3 - Configuration
6rd
Currently unsupported.
Enter the
Primary DNS Server
address.
Enter the
Secondary DNS Server
address.
Enable if you want to minimize the number of routes to the
destination by using a hub and spoke method of networking.
Choose the
6rd DHCPv4 Option
to automatically populate the data
values, or
Manual Configuration
to enter the settings manually.
Enter the
6rd IPv6 Prefix
and mask length supplied by your ISP (for
manual configuration only).
Displays the
WAN IPv4 Address
. Enter the mask length (for manual
configuration only).
Enter the
6rd border relay IPv4 Address
supplied by your ISP (for
manual configuration only).
Displays the LAN (local) IPv6 address for the router.
Displays the router’s
LAN Link-Local Address
.
Assign IPv6
Prefix:
Primary DNS
Server:
Secondary DNS
Server:
Enable Hub and
Spoke Mode:
6rd
Configuration:
6rd IPv6 Prefix:
WAN IPv4
Address:
6rd Border
Relay IPv4
Address:
LAN IPv6
Address:
LAN IPv6 Link-
Local Address:
In this section, the user can configure the IPv6 6rd connection settings.
Page 49 / 120
45
D-Link DIR-859 User Manual
Section 3 - Configuration
Click to enable the
Automatic IPv6 Address Assignment
feature.
Select
SLAAC + RDNSS
,
SLAAC + Stateless DHCP
, or
Stateful
DHCPv6
.
Enter the IPv6 address lifetime (in minutes).
Click
Save
when you are done.
Enable Automatic
IPv6 Address
Assignment:
Autoconfiguration
Type:
Router
Advertisement
Lifetime:
Page 50 / 120
46
D-Link DIR-859 User Manual
Section 3 - Configuration
Local Connectivity Only
Click to enable Unique Local IPv6 Unicast Addresses settings.
When ULA is enabled, you may also enable automatic configuration
of the ULA prefix.
Will display the
Current ULA Prefix
.
Will display the
LAN IPv6 ULA
.
Click
Save
when you are done.
Enable ULA:
Use Default
ULA Prefix:
Current ULA
Prefix:
LAN IPv6 ULA:
Local Connectivity Only
allows you to set up an IPv6 connection that will not connect to the Internet. For this Internet Connection type, you must
click on
Advanced Settings...
to see the required fields below.
19216811.live