Page 16 / 96
                                                    Scroll up to view Page 11 - 15
                                                
                    
²³
D-L±nk DIR-855 User Manual
Sect±on ³ - Installat±on
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network. 
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug 
anything into the Internet port of the D-Link router. 
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless 
network, open a web browser and enter the IP address you assigned to the router. Refer to the 
Configuration
and 
Wireless
Security
sections for more information on setting up your wireless network.
 
                 
                                
                    
                        Page 17 / 96
                                            
                    
²´
D-L±nk DIR-855 User Manual
Sect±on ³ - Installat±on
The DIR-855 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to 
guide you quickly through the installation process. 
Insert the 
Quick Router Setup Wizard CD
in the CD-ROM drive. 
The step-by-step instructions that follow are shown 
in Windows
®
XP. The steps and screens are similar for the other Windows operating systems.
If the CD Autorun function does not automatically start on your computer, go to 
Start
> 
Run
. In the run box type 
“
D:\DIR855.exe
” (where 
D:
represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click 
Start.
Getting Started
Note: 
It is reccomended to write down the SSID and Security Key, followed by the login password on the provided CD 
holder.
Click 
Start
 
                 
                                
                    
                        Page 18 / 96
                                            
                    
²µ
D-L±nk DIR-855 User Manual
Sect±on ´ - Configurat±on
Configuration
This section will show you how to configure your new D-Link wireless router using the web-based configuration 
utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser 
such as Internet Explorer and enter http://dlinkrouter 
or 
Select 
Admin
from the drop-down menu and then enter 
your password. Leave the password blank by default.
If you get a 
Page Cannot be Displayed
error, please 
refer to the 
Troubleshooting
section for assistance.
 
                 
                                
                    
                        Page 19 / 96
                                            
                    
²5
D-L±nk DIR-855 User Manual
Sect±on ´ - Configurat±on
Setup Wizard
Click 
Launch Internet Connection Setup Wizard
to begin.
If you want to enter your settings without running the wizard, click 
Manual Configuration
and skip to page 19.
Click 
Next
to continue.
Create a new password and then click 
Next
to continue.
 
                 
                                
                    
                        Page 20 / 96
                                            
                    
²¶
D-L±nk DIR-855 User Manual
Sect±on ´ - Configurat±on
Select your time zone from the drop-down menu and then click 
Next
to 
continue.
Select the type of Internet connection you use and then click 
Next
to 
continue.
If you selected Dynamic, you may need to enter the MAC address of 
the computer that was last connected directly to your modem. If you are 
currently using that computer, click 
Clone Your PC’s MAC Address
and then click 
Next
to continue.
The Host Name is optional but may be required by some ISPs. The default 
host name is the device name of the router and may be changed.