Page 46 / 158 Scroll up to view Page 41 - 45
42
D-Link DIR-850L User Manual
Section 3 - Configuration
Internet Setup
DS-Lite
Another Internet Connection type is DS-Lite.
DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for configuration:
DS-Lite Configuration:
Select the
DS-Lite DHCPv6 Option
to let
the router allocate the AFTR IPv6 address
automatically. Select the
Manual Configu-
ration
to enter the AFTR IPv6 address in
manually.
AFTR IPv6 Address:
After selecting the Manual Configuration
option above, the user can enter the AFTR
IPv6 address used here.
B4 IPv4 Address:
Enter the B4 IPv4 address value used here.
WAN IPv6 Address:
Once connected, the WAN IPv6 address
will be displayed here.
IPv6 WAN Default Gateway
Once connected, the IPv6 WAN Default
Gateway address will be displayed here.
Click on the
Save Settings
button to accept the changes made.
Click on the
Don’t Save Settings
button to discard the changes made.
Page 47 / 158
43
D-Link DIR-850L User Manual
On this page the user can configure the Wireless settings for this device. There are 3 ways to configure Wireless using this router. Firstly, the user
can choose to make use for the quick and easy
Wireless Connection Setup Wizard
. Secondly, the user can choose to make use Wi-Fi Protected
Setup. Lastly, the user can configure the Wireless settings manually.
Wireless Settings: Wireless Connection Setup Wizard
The Wireless Connection Setup Wizard is specially designed to assist
basic network users with a simple, step-by-step set of instructions to
configure the wireless settings of this router. It is highly recommended
to customized the wireless network settings to fit into your environment
and to add higher security.
Step 1:
In this step, the user must enter a custom Wireless Network
Name or SSID. Enter the new
Network Name (SSID)
in the appropriate
space provided.
There are seperate spaces provided for a
2.4GHz
Network Name and a
5GHz
Network Name.
Secondly the user can choose between two wireless security wizard
configurations. The user can select ‘
Automatically assign a network
key
’, by which the router will automatically generate a WPA/WPA2 pre-
shared key using the TKIP and AES encryption methods; or the user
can select ‘
Manually assign a network key
’, by which the user will be
prompt to manually enter a WPA/WPA2 pre-shared key using the TKIP
and AES encryption methods.
Click on the
Prev
button to return to the previous page. Click on the
Next
button to continue to the next page. Click on the
Cancel
button to
discard the changes made and return to the main wireless page.
To initiate the
Wireless Connection Setup Wizard
click on the Wireless
Connection Setup Wizard button.
Wireless connection setup wizard
Page 48 / 158
44
D-Link DIR-850L User Manual
Step 2:
This step will only be available if the user selected ‘Manually
assign a network key’ in the previous step. Here the user can manually
enter the WPA/WPA2 pre-shared key in the
Wireless Security Password
space provided. The key entered must be between 8 and 63 characters
long. Remember, this key will be used when wireless clients wants to
connect to this device. So please remember this key to prevent future
troubleshooting.
If you want to use the same Wireless Security Password for both 2.4GHz
and 5GHz bands,
tick
the option provided. If not selected, you need
to input two seperate
Wireless Security Passwords for each individual
Wireless band.
Click on the
Prev
button to return to the previous page. Click on the
Next
button to continue to the next page. Click on the
Cancel
button to
discard the changes made and return to the main wireless page.
Setup Complete:
On this page the user can view the configuration
made and verify whether they are correct.
Click on the
Prev
button to return to the previous page. Click on the
Cancel
button to discard the changes made and return to the main
wireless page. Click on the
Save
button to accept the changes made.
Page 49 / 158
45
D-Link DIR-850L User Manual
After click the
Save
button the device will save the settings made and
return to the main wireless page.
End of Wizard.
Page 50 / 158
46
D-Link DIR-850L User Manual
Wireless Settings: Wi-Fi Protected Setup Wizard
If your Wireless Clients support the WPS connection method, this Wi-Fi
Protected Setup Wizard can be used to initiate a wireless connection
between this device and Wireless clients with a simple click of the WPS
button. The Wi-Fi Protected Setup Wizard is specially designed to assist
basic network users with a simple, step-by-step set of instructions to
connect wireless clients to this router using the WPS method.
To initiate the Wi-Fi Protected Setup Wizard click on the
Add Wireless
Device with WPS
button.
Step 1:
In this step the user have two options to choose from. You can
choose
Auto
if the wireless client supports WPS, or
Manual
if the wire-
less client does not support WPS.
Click on the
Prev
button to return to the previous page. Click on the
Next
button to continue to the next page. Click on the
Cancel
button to
discard the changes made and return to the main wireless page.
Step 2:
After selecting
Auto
, the following page will appear. There are
two ways to add a wireless device, that supports WPS. Firstly, there is the
Personal Identification Number (
PIN
) method. Using this method will
prompt the user to enter a PIN code. This PIN code should be identical
on the wireless client. Secondly, there is the Push Button Configuration
(
PBC
) method. Using this method will allow the wireless client to con-
nect to this device by similarly pressing the PBC button on it.
Click on the
Prev
button to return to the previous page. Click on the
Next
button to continue to the next page. Click on the
Cancel
button to
discard the changes made and return to the main wireless page.
Wi-Fi Protected Setup Wizard

Rate

4.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top