Page 46 / 103
Scroll up to view Page 41 - 45
42
D-Link DIR-842 User Manual
Section 4 - Configuration
Displays the router’s LAN link-local address.
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable or disable DHCP-PD for other IPv6 routers connected to the
LAN interface.
Note:
This feature requires a smaller subnet prefix than /64 (i.e. allowing
for a larger address allocation), such as /63. Contact your ISP for more
information.
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC + Stateless
DHCPv6
.
Enter the IPv6 address lifetime (in minutes).
Click
Save
when you are done.
LAN IPv6 Link-
Local Address:
Enable
Automatic
IPv6 Address
Assignment:
Enable
Automatic
DHCP-PD in
LAN:
Auto
Configuration
Type:
Router
Advertisement
Lifetime:
Page 47 / 103
43
D-Link DIR-842 User Manual
Section 4 - Configuration
6 to 4
Displays the 6 to 4 address.
Enter the 6 to 4 relay supplied by your ISP.
Enter the primary DNS server address.
Enter the secondary DNS server address.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN link-local address.
Check to enable the Automatic IPv6 Address Assignment feature.
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC + Stateless
DHCPv6
.
Enter the IPv6 address lifetime (in minutes).
Click
Save
when you are done.
6 to 4 Address:
6 to 4 Relay:
Primary DNS
Server:
Secondary DNS
Server:
LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enable Automatic
IPv6 Address
Assignment:
Autoconfiguration
Type:
Router
Advertisement
Lifetime:
In this section the user can configure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling
technology that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet.
Page 48 / 103
44
D-Link DIR-842 User Manual
Section 4 - Configuration
6rd
Currently unsupported.
Enter the primary DNS server address.
Enter the secondary DNS server address.
Enable if you want to minimize the number of routes to the
destination by using a hub and spoke method of networking.
Choose the
6rd DHCPv4 Option
to automatically discover and
populate the data values, or
Manual Configuration
to enter the
settings yourself.
Displays the router’s LAN link-local address.
Assign IPv6
Prefix:
Primary DNS
Server:
Secondary DNS
Server:
Enable Hub and
Spoke Mode:
6rd
Configuration:
LAN IPv6 Link-
Local Address:
In this section the user can configure the IPv6 6rd connection settings.
Page 49 / 103
45
D-Link DIR-842 User Manual
Section 4 - Configuration
Check to enable the Automatic IPv6 Address Assignment feature.
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC + Stateless
DHCPv6
.
Enter the IPv6 address lifetime (in minutes).
Click
Save
when you are done.
Enable
Automatic
IPv6 Address
Assignment:
Auto
Configuration
Type:
Router
Advertisement
Lifetime:
Page 50 / 103
46
D-Link DIR-842 User Manual
Section 4 - Configuration
Local Connectivity Only
Click here to enable Unique Local IPv6 Unicast Addresses settings.
Checking this box will automatically configure the ULA prefix for
the default setting.
This section will display the current settings for your IPv6 ULA.
This section will display the current settings for your LAN IPv6 ULA.
Click
Save
when you are done.
Enable ULA:
Use Default
ULA Prefix:
Current IPv6
ULA Settings:
LAN IPv6
ULA:
Local Connectivity Only
allows you to set up an IPv6 connection that will not connect to the Internet.
19216811.live