Page 111 / 161
Scroll up to view Page 106 - 110
106
D-Link DIR-826L User Manual
Section 3 - Configuration
IPv6
The IPv6 page displays a summary of the Router’s IPv6 settings and lists the IPv6 address and host name of any IPv6 clients.
Page 112 / 161
107
D-Link DIR-826L User Manual
Section 3 - Configuration
IPV6 Routing
This page displays the IPV6 routing details configured for your router.
Page 113 / 161
108
D-Link DIR-826L User Manual
Section 3 - Configuration
Support
Page 114 / 161
109
D-Link DIR-826L User Manual
Section 4 - Security
Connect a Wireless Client to your Router
WPS Button
Step.2
- Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS
process).
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-826L router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step.1
- Press the WPS button on the DIR-826L for about 1 second. The Internet LED on the front will start to blink.
Step.3
- Allow up to 1 minute to configure. Once the Internet light stops blinking, you will be connected and your wireless
connection will be secure with WPA2.
WPS Button
Page 115 / 161
110
D-Link DIR-826L User Manual
Section 4 - Security
Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Wireless Icon
WPA/WPA2
19216811.live