1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-826L
    5. /
  5. 16
Page 76 / 161 Scroll up to view Page 71 - 75
71
D-Link DIR-826L User Manual
Section 3 - Configuration
This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.
Enter a name for the rule or select an application from
the drop-down menu. Select an application and click
<<
to populate the fields.
Enter the IP address of the computer on your local
network that you want to allow the incoming
service to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the “Computer Name” drop-down
menu. Select your computer and click
<<
.
Enter the port that you want to open next to Private
Port and Public Port. The private and public ports are
usually the same. The public port is the port seen from
the Internet side, and the private port is the port being
used by the application on the computer within your
local network.
Select
TCP
,
UDP
, or
Both.
from the drop-down menu.
The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always be
enabled. You can create your own times in the
Tools
>
Schedules
section.
Select
Allow.All
(most common) or a created Inbound
filter. You may create your own inbound filters in the
Advanced.>.Inbound.Filter
page.
Name:
IP Address:
Private Port/
Public Port:
Protocol Type:
Schedule:
Inbound Filter:
Virtual Server
Advanced
Page 77 / 161
72
D-Link DIR-826L User Manual
Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Port Forwarding
Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click
<<
to populate the fields.
Enter the IP address of the computer on your local
network that you want to allow the incoming service
to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the “Computer Name” drop-down
menu. Select your computer and click
<<
.
Enter the TCP and/or UDP port or ports that you
want to open. You can enter a single port or a range
of ports. Separate ports with a common.
Example: 24,1009,3000-4000
The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to
Always
,
which will allow the particular service to always be
enabled. You can create your own times in the
Tools
>
Schedules
section.
Select
Allow. All
(most common) or a created
Inbound filter. You may create your own inbound
filters in the
Advanced.>.Inbound.Filter
page.
Name:
IP Address:
TCP/UDP:
Schedule:
Inbound Filter:
Page 78 / 161
73
D-Link DIR-826L User Manual
Section 3 - Configuration
Enter a name for the rule. You may select a
pre-defined application from the drop-down menu
and click
<<
.
This is the port used to trigger the application. It
can be either a single port or a range of ports.
Select the protocol of the trigger port (TCP, UDP,
or Both).
This is the port number on the Internet side that
will be used to access the application. You may
define a single port or a range of ports. You can use
a comma to add multiple ports or port ranges.
Select the protocol of the firewall port (TCP, UDP,
or Both).
The schedule of time when the Application Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always
be enabled. You can create your own times in the
Tools
>
Schedules
section.
Name:
Trigger:
Traffic Type:
Firewall:
Traffic Type:
Schedule:
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of
these applications work with the DIR-826L. If you need to run applications that require multiple connections, specify the port
normally associated with an application in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter the firewall
(public) ports associated with the trigger port to open them for inbound traffic.
The DIR-826L provides some predefined applications in the table on the bottom of the web page. Select the application you
want to use and enable it.
Page 79 / 161
74
D-Link DIR-826L User Manual
Section 3 - Configuration
QoS Engine
This option is disabled by default. Enable this option for better performance
and experience with online games and other interactive applications, such
as VoIP.
This option is enabled by default when the QoS Engine option is enabled. This
option will allow your router to automatically determine the uplink speed of
your Internet connection.
This displays the detected uplink speed.
The speed at which data can be transferred from the router to your ISP. This
is determined by your ISP. ISP’s often speed as a download/upload pair.
For example, 1.5Mbits/284Kbits. Using this example, you would enter 284.
Alternatively you can test your uplink speed with a service such as speedtest.net.
A QoS Engine Rule identifies a specific message flow and assigns a priority
to that flow. For most applications, automatic classification will be adequate,
and specific QoS Engine Rules will not be required.
The QoS Engine supports overlaps between rules, where more than one rule
can match for a specific message flow. If more than one rule is found to match
the rule with the highest priority will be used.
Create a name for the rule that is meaningful to you.
The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent).
The protocol used by the messages.
The rule applies to a flow of messages whose LAN-side IP address falls within the range set here.
The rule applies to a flow of messages whose LAN-side port number is within the range set here.
The rule applies to a flow of messages whose WAN-side IP address falls within the range set here.
The rule applies to a flow of messages whose WAN-side port number is within the range set here.
Enable QoS Engine:
Automatic Uplink
Speed:
Measured Uplink
Speed:
Manual Uplink Speed:
QoS Engine Rules:
Name:
Priority:
Protocol:
Local IP Range:
Local Port Range:
Remote IP Range:
Remote Port Range:
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are
disabled and application priority is not classified automatically.
Page 80 / 161
75
D-Link DIR-826L User Manual
Section 3 - Configuration
Network Filters
Select
.Turn.MAC.Filtering.Off
,
Allow.MAC.addresses.
listed.below
, or
Deny.MAC.addresses.listed.below
from the drop-down menu.
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer
to the
Networking Basics
section in this manual.
Select a DHCP client from the drop-down menu and
click
<<
to copy that MAC Address.
Click to remove the MAC address.
Configure MAC
Filtering:
MAC Address:
DHCP Client:
Clear:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top