Page 116 / 158
Scroll up to view Page 111 - 115
111
D-Link DIR-825 User Manual
Section 4 - Security
3. Double-click the DIR-825.
4. Input the WPS PIN number (displayed in the WPS window on the
Router’s LCD screen or in the
Setup.
>
Wireless.Setup
menu in
the Router’s Web UI) and click
Next
.
Page 117 / 158
112
D-Link DIR-825 User Manual
Section 4 - Security
5. Type a name to identify the network.
6. To configure advanced settings, click the
icon.
Click
Next
to continue.
Page 118 / 158
113
D-Link DIR-825 User Manual
Section 4 - Security
7. The following window appears while the Router is being
configured.
Wait for the configuration to complete.
8. The following window informs you that WPS on the router has
been setup successfully.
Make a note of the security key as you may need to provide this
security key if adding an older wireless device to the network in
the future.
9. Click
Close
to complete WPS setup.
Page 119 / 158
114
D-Link DIR-825 User Manual
Section 5 - Connecting to a Wireless Network
Windows Vista®
Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please
refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site
survey” option similar to the Windows Vista® utility as seen below.
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select
Connect.to.a.network
.
If you receive the
Wireless.Networks.Detected
bubble, click on the
center of the bubble to access the utility.
or
The utility will display any available wireless networks in your area. Click
on a network (displayed using the SSID) and click the
Connect
button.
If you get a good signal but cannot access the Internet, check you TCP/
IP settings for your wireless adapter. Refer to the
Networking.Basics
section in this manual for more information.
Page 120 / 158
115
D-Link DIR-825 User Manual
Section 5 - Connecting to a Wireless Network
WPA/WPA2
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
2.
.
Highlight the wireless network (SSID) you would like to connect
to and click
Connect
.
1.
.
Open the Windows Vista® Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower right corner of
screen). Select
Connect.to.a.network
.
19216811.live