1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-818LW
    5. /
  5. 14
Page 66 / 190 Scroll up to view Page 61 - 65
D-Link DIR-818LW User Manual
61
Section 3 - Configuration
Step.3:.Internet.Connection.(Dynamic.IP.Address)
After selecting the dynamic IP address Internet connection method, the following page will appear.
The following parameters will be available for configuration:
MAC.Address:
Enter the MAC address of the Internet
gateway (plugged into the Internet port of
this device) here.
Clone.Button:
If the configuration PC also acts as the Internet
gateway, then click on the
Clone.Your.PC’s.
MAC.Address
button to copy the PC’s MAC
address into the space provided. If you’re not
sure, leave the MAC address field blank.
Host.Name:
Enter the host name used here. You may also
need to provide a host name. If you do not
have or know this information, please contact
your ISP.
Primary.DNS.Address:
Enter the primary DNS IP address used here.
Secondary.DNS.Address:
Enter the secondary DNS IP address used here.
This field is normally optional. Only one DNS
address is required for a functional Internet
connection, but using a second DNS address
provides more stability.
Click
Next
to continue.
Step.3:.Internet.Connection.(PPPoE)
After selecting the PPPoE Internet connection method, the following
page will appear:
The following parameters will be available for configuration:
User.Name:
Enter the PPPoE account user name used here.
This information is given by the ISP.
Password:
Enter the PPPoE account password used here.
This information is given by the ISP.
Click
Next.
to continue.
Page 67 / 190
D-Link DIR-818LW User Manual
62
Section 3 - Configuration
Step.3:.Internet.Connection.(PPTP)
After selecting the PPTP Internet connection method, the following
page will appear:
The following parameters will be available for configuration:
Address.Mode:
Here the user can specify whether this
Internet connection requires the use of a
Dynamic or Static IP address. PPTP usual
requires a Dynamic IP configuration.
PPTP.IP.Address:
Enter the PPTP IP address used here. This
option is only available if Static IP is se-
lected.
PPTP.Subnet.Mask:
Enter the PPTP Subnet Mask used here.
PPTP.Gateway.IP.Address:
Enter the PPTP Gateway IP address used
here.
PPTP.Server.IP.Address:
Enter the PPTP Server IP address used
here. This is normally the same a the PPTP
Gateway IP address.
User.Name:
Enter the PPTP username used here.
Password:
Enter the PPTP password used here.
Verify.Password:
Re-enter the PPTP password used here.
Primary.DNS.Address:
Enter the Primary DNS IP address used
here.
Secondary.DNS.Address:
Enter the Secondary DNS IP address used
here. This field is normally optional. Only
one DNS address is required for a
functional Internet connection, but
using a second DNS address provides
more stability.
Click
Next.
to continue.
Page 68 / 190
D-Link DIR-818LW User Manual
63
Section 3 - Configuration
Step.3:.Internet.Connection.(L2TP)
After selecting the L2TP Internet connection method, the following
page will appear:
The following parameters will be available for configuration:
Address.Mode:
Here the user can specify whether this
Internet connection requires the use of a
Dynamic or Static IP address. L2TP usual
requires a Dynamic IP configuration.
L2TP.IP.Address:
Enter the L2TP IP address used here. This
option is only available if Static IP is
selected.
L2TP.Subnet.Mask:
Enter the L2TP Subnet Mask used here.
L2TP.Gateway.IP.Address:
Enter the L2TP Gateway IP address used
here.
L2TP.Server.IP.Address:
Enter the L2TP Server IP address used
here. This is normally the same a the L2TP
Gateway IP address.
User.Name:
Enter the L2TP username used here.
Password:
Enter the L2TP password used here.
Verify.Password:
Re-enter the L2TP password used here.
Primary.DNS.Address:
Enter the Primary DNS IP address used
here.
Secondary.DNS.Address:
Enter the Secondary DNS IP address used
here. This field is normally optional. Only
one DNS address is required for a
functional Internet connection, but
using a second DNS address provides
more stability.
Click
Next.
to continue.
Page 69 / 190
D-Link DIR-818LW User Manual
64
Section 3 - Configuration
Step.3:.Internet.Connection.(Static.IP.Address)
After selecting the Static IP Address Internet connection method, the following page will appear:
Setup.Complete!
This is the last page of the Internet Connection Setup Wizard.
Click the
Connect
button to save your settings.
The following parameters will be available for configuration:
IP.Address:
Enter the Static IP address provided by the
ISP here.
Subnet.Mask:
Enter the Subnet Mask provided by the ISP
here.
Gateway.Address:
Enter the Gateway IP address provided by
the ISP here.
Primary.DNS.Address:
Enter the Primary DNS IP address used
here.
Secondary.DNS.Address:
Enter the Secondary DNS IP address used
here. This field is normally optional. Only
one DNS address is required for a
functional Internet connection, but
using a second DNS address provides
more stability.
Click
Next
to continue.
Page 70 / 190
D-Link DIR-818LW User Manual
65
Section 3 - Configuration
Internet (Manual)
On this page the user can configure the Internet Connection settings
manually. To access the Manual Internet Connection Setup page, click
on the
Manual Internet Connection Setup
button. On this page there a
multiple parameters that can be configured regarding the Internet Con-
nection setup. We’ll discuss them from top to bottom.
At any given point the user can save the configuration done, on this
page, by clicking on the
Save Settings
button. If you choose to discard
the changes made, click on the
Don’t Save Settings
button.

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top