D-Link DIR-803 Router Manual PDF (Setup & Configuration Guide)

Page 26 / 139 Scroll up to view Page 21 - 25

22

D-Link DIR-803 User Manual

Step.3:.Internet.Connection.(Dynamic.IP.Address)

After selecting the Dynamic IP Address Internet connection method, the following page will appear.

The following parameters will be available for conﬁguration:

MAC.Address:

Enter the MAC address of the Internet gate-

way (plugged into the Internet port of this

device) here.

Clone.Button:

If the conﬁguration PC also acts as the Internet

gateway, then click on the Clone Your PC’s

MAC Address button to copy the PC’s MAC

address into the space provided. If you’re not

sure, leave the MAC Address ﬁeld blank.

Host.Name:

Enter the host name used here. You may also

need to provide a Host Name. If you do not

have or know this information, please contact

your ISP.

Primary.DNS.Address:

Enter the Primary DNS IP address used here.

Secondary.DNS.Address:

Enter the Secondary DNS IP address used

here. This ﬁeld is normally optional. Only

one DNS address is required for a functional

Internet connection, but using a second DNS

address provides more stability.

Click

Step.3:.Internet.Connection.(PPPoE)

After selecting the PPPoE Internet connection method, the following

page will appear:

The following parameters will be available for conﬁguration:

User.Name:

Enter the PPPoE account user name used here.

This information is given by the ISP.

Password:

Enter the PPPoE account password used here.

This information is given by the ISP.

Click

Next.

to continue.

Page 27 / 139

23

D-Link DIR-803 User Manual

Step.3:.Internet.Connection.(PPTP)

After selecting the PPTP Internet connection method, the following

page will appear:

The following parameters will be available for conﬁguration:

Address.Mode:

Here the user can specify whether this

Internet connection requires the use of a

Dynamic or Static IP address. PPTP usual

requires a Dynamic IP conﬁguration.

PPTP.IP.Address:

Enter the PPTP IP address used here. This

option is only available if Static IP is se-

lected.

PPTP.Subnet.Mask:

Enter the PPTP Subnet Mask used here.

PPTP.Gateway.IP.Address:

Enter the PPTP Gateway IP address used

here.

PPTP.Server.IP.Address:

Enter the PPTP Server IP address used

here. This is normally the same a the PPTP

Gateway IP address.

User.Name:

Enter the PPTP username used here.

Password:

Enter the PPTP password used here.

Verify.Password:

Re-enter the PPTP password used here.

Primary.DNS.Address:

Enter the Primary DNS IP address used here.

Secondary.DNS.Address:

Enter the Secondary DNS IP address used here. This ﬁeld is normally optional. Only one DNS address is required for

a functional Internet connection, but using a second DNS address provides more stability.

Click

Next.

to continue.

Page 28 / 139

24

D-Link DIR-803 User Manual

Step.3:.Internet.Connection.(L2TP)

After selecting the L2TP Internet connection method, the following

page will appear:

The following parameters will be available for conﬁguration:

Address.Mode:

Here the user can specify whether this

Internet connection requires the use of a

Dynamic or Static IP address. L2TP usual

requires a Dynamic IP conﬁguration.

L2TP.IP.Address:

Enter the L2TP IP address used here. This

option is only available if Static IP is se-

lected.

L2TP.Subnet.Mask:

Enter the L2TP Subnet Mask used here.

L2TP.Gateway.IP.Address:

Enter the L2TP Gateway IP address used

here.

L2TP.Server.IP.Address:

Enter the L2TP Server IP address used

here. This is normally the same a the L2TP

Gateway IP address.

User.Name:

Enter the L2TP username used here.

Password:

Enter the L2TP password used here.

Verify.Password:

Re-enter the L2TP password used here.

Primary.DNS.Address:

Enter the Primary DNS IP address used

here.

Secondary.DNS.Address:

Enter the Secondary DNS IP address used

here. This ﬁeld is normally optional. Only

one DNS address is required for a func-

tional Internet connection, but using a

second DNS address provides more stabil-

ity.

Click

Next.

to continue.

Page 29 / 139

25

D-Link DIR-803 User Manual

Step.3:.Internet.Connection.(Static.IP.Address)

After selecting the Static IP Address Internet connection method, the following page will appear:

Setup.Complete!

This is the last page of the Internet Connection Setup Wizard.

Click the

Connect

button to save your settings.

The following parameters will be available for conﬁguration:

IP.Address:

Enter the Static IP address provided by the

ISP here.

Subnet.Mask:

Enter the Subnet Mask provided by the ISP

here.

Gateway.Address:

Enter the Gateway IP address provided by

the ISP here.

Primary.DNS.Address:

Enter the Primary DNS IP address used

here.

Secondary.DNS.Address:

Enter the Secondary DNS IP address used

here. This ﬁeld is normally optional. Only

one DNS address is required for a func-

tional Internet connection, but using a

second DNS address provides more stabil-

ity.

Click

Page 30 / 139

26

D-Link DIR-803 User Manual

Internet (Manual)

On this page the user can conﬁgure the Internet Connection settings

manually. To access the Manual Internet Connection Setup page, click

on the

Manual Internet Connection Setup

button. On this page there

a multiple parameters that can be conﬁgured regarding the Internet

Connection setup. We’ll discuss them from top to bottom.

At any given point the user can save the conﬁguration done, on this

page, by clicking on the

Save Settings

button. If you choose to discard

the changes made, click on the

Don’t Save Settings

button.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share