1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-803
    5. /
  5. 28
Page 136 / 139 Scroll up to view Page 131 - 135
132
D-Link DIR-803 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step.1
Windows® 7 -
Click on
Start
>
Control.Panel
>
Network.and.Internet
>
Network.and.Sharing.Center
.
Windows Vista® -
Click on
Start
>
Control.Panel
>
Network.and.Internet
>
Network.and.Sharing.Center
>
Manage.Network
.
.
.
Connections±
Windows® XP -
Click on
Start
>
Control.Panel
>
Network.Connections
.
Windows® 2000 -
From the desktop, right-click
My.Network.Places
>
Properties
.
Step.2
Right-click on the
Local.Area.Connection
which represents your network adapter and select
Properties
.
Step.3
Highlight
Internet.Protocol.(TCP/IP)
and click
Properties
.
Step.4
Click
Use.the.following.IP.address
and enter an IP address that is on the same subnet
as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not
in use on the network. Set the Default Gateway the same as the LAN IP address of your
router (I.E. 192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step.5
Click
OK
twice to save your settings.
Page 137 / 139
133
D-Link DIR-803 User Manual
Appendix C - Technical Specifications
Technical Specifications
Hardware Specifications
•
LAN Interface: Four 10/100Mbps LAN ports
•
WAN Interface: One 10/100Mbps Internet port
•
Wireless Interface (2.4Ghz): IEEE 802.11b/g/n
•
Wireless Interface (5Ghz): IEEE 802.11a/n/ac
Operating Voltage
•
Input: 100~240V (±20%), 50~60Hz
•
Output: DC5V, 1A
Temperature
•
Operating: 32 ~ 104
o
F (0 ~ 40
o
C)
•
Non-Operating: -4 ~ 149
o
F (-20 ~ 65
o
C)
Humidity
•
Operating: 10% - 90% non-condensing
•
Non-Operating: 5% - 95% non-condesing
Wireless Frequency Range
•
IEEE 802.11a: 5180 MHz~5240 MHz, 5745 MHz~5825 MHz
•
IEEE 802.11b: 2400 MHz~2483 MHz
•
IEEE 802.11g: 2400 MHz~2484 MHz
•
IEEE 802.11n: 2400 MHz~2484 MHz, 5180 MHz~5240 MHz, 5745
MHz~5825 MHz
•
IEEE 802.11ac: 5180 MHz~5240 MHz, 5745 MHz~5825 MHz
Wireless Bandwidth Rate
•
IEEE 802.11a:
54, 48, 36, 24, 18, 12, 9, and 6 Mbps
•
IEEE 802.11b: 11, 5.5, 2, and 1 Mbps
•
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps
•
IEEE 802.11n: 6.5 to 300 Mbps
•
IEEE 802.11ac(Draft): 6.5 to 433 Mbps
Antenna Type
•
Two External Antennas
Wireless Security
•
WPA/WPA2-Personal, WPA/WPA2-Enterprise, WPS (PIN & PBC)
Certifications
•
FCC, IC, CE and CSA
Dimensions & Weight
•
151.6x112x30.5mm
•
190 grams
Page 138 / 139
134
D-Link DIR-803 User Manual
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that inter-
ference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
Page 139 / 139
135
D-Link DIR-803 User Manual
Industry Canada statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable,
et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems;
Avertissement:
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin
de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre
corps.

Rate

4.7 / 5 based on 3 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top